Resistors
Connectors
Capacitors
Wires and Connectors
Semiconductors - ICs
DB107 1 Amp Bridge Rectifier
Features:-
• Glass passivated die construction
• Low forward voltage drop
• High current capability
• High surge current capability
• Plastic material-UL flammability 94V-0
• This is a Pb − Free Device
• “-HF” suffix is for Halogen Free Device
• All SMC parts are traceable to the wafer lot
• Additional testing can be offered upon request
Specification:-
| Symbol | Parameter | Value | Units |
| VRRM | Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage | 1000 | V |
| VRWM | |||
| VR | |||
| VRMS | RMS Reverse Voltage | 700 | V |
| IF(AV) | Average Forward Output Current (Note 1) @ TC =100°C | 1 | A |
| IFSM | Non-Repetitive Peak Forward Surge Current 8.3ms | 45 | A |
| Single half sine-wave superimposed on rated load | |||
| I2 t | I2t Rating for Fusing (t < 8.3ms) | 8.404 | A 2s |
EL817 Optocoupler – Transistor Output
FAN7392 High-Current, High- & Low-Side, Gate-Drive IC
Features:-
- Floating Channel for Bootstrap Operation to +600V
- 3AJ3A Sourcing/Sinking Current Driving Capability
- Common-Mode dv/dt Noise Canceling Circuit
- 3.3V Logic Compatible Separate Logic Supply (VDD) Range from 3.3V to 20V
- Under-Voltage Lockout for vcc and VBS Cycle-by-Cycle Edge-Triggered Shutdown Logic
- Matched Propagation Delay for Both Channels
- Outputs In-phase with Input Signal
HLF DIP Cd4001be Integrated Circuit, For Power
IC 24C04 ATMEL Atmel 24C16A/24C16 8 Pin Dil/Dip 16K Serial Eeprom
|
MICROCHIP (ATMEL) |
||
|
EEPROM memory |
||
|
EEPROM |
||
|
SPI |
||
|
128x8bit |
||
|
20MHz |
||
|
SMD |
||
|
SO8 |
||
|
1kb |
||
|
series |
||
|
-40...125°C |
||
|
1M |
||
|
5ms |
||
|
1.8...5.5V |
- Gross weight: 0.072g
- Manufacturer part number: AT25010B-SSHL-B
Items sensitive to electrostatic charges are packed while maintaining safety measures in a special ESD area. Elements are packaged on anti-static roller tracks or blister-packed with a static-dissipating sponge. All products in the special ESD area are also packed in shielding bags.
IC 4N33 4N35 IC – Optocoupler Phototransistor IC
The 4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. The couplers are Underwriters Laboratories (UL) listed to comply with a 5300 VRMS isolation test voltage.
This isolation performance is accomplished through double molding isolation manufacturing process. Comliance to DIN EN 60747-5-2(VDE0884)/ DIN EN 60747-5-5 pending partial discharge isolation specification is available for these families by ordering option 1.
These isolation processes and the ISO9001 quality program results in the highest isolation performance available for a commecial plastic phototransistor optocoupler. The devices are available in lead formed configuration suitable for surface mounting and are available either on tape and reel, or in standard tube shipping containers.
Features:-
• Isolation Test Voltage 5300 VRMS
• Interfaces with common logic families
• Input-output coupling capacitance < 0.5 pF
• Industry Standard Dual-in line 6-pin package
Agency Approvals:-
• Underwriters Laboratory File #E52744
• DIN EN 60747-5-2(VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
Applications:-
• AC mains detection
• Reed relay driving
• Switch mode power supply feedback
• Telephone ring detection
• Logic ground isolation
• Logic coupling with high frequency noise rejection
Specification:-
Related Document:-
4N35 IC Data Sheet
| Symbol | Parameter | Value | Unit |
| VR | Reverse voltage | 6 | V |
| IF | Forward current | 60 | mA |
| IFSM | Surge current | 2.5 | A |
| Pdiss | Power dissipation | 100 | mW |
| VCEO | Collector-emitter breakdown voltage | 70 | V |
| VEBO | Emitter-base breakdown voltage | 7 | V |
| IC | Collector current | 100 | mA |
4N35 IC Data Sheet
IC 4N35 OPTO 4N35 IC – Optocoupler Phototransistor IC
The 4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. The couplers are Underwriters Laboratories (UL) listed to comply with a 5300 VRMS isolation test voltage.
This isolation performance is accomplished through double molding isolation manufacturing process. Comliance to DIN EN 60747-5-2(VDE0884)/ DIN EN 60747-5-5 pending partial discharge isolation specification is available for these families by ordering option 1.
These isolation processes and the ISO9001 quality program results in the highest isolation performance available for a commecial plastic phototransistor optocoupler. The devices are available in lead formed configuration suitable for surface mounting and are available either on tape and reel, or in standard tube shipping containers.
Features:-
• Isolation Test Voltage 5300 VRMS
• Interfaces with common logic families
• Input-output coupling capacitance < 0.5 pF
• Industry Standard Dual-in line 6-pin package
Agency Approvals:-
• Underwriters Laboratory File #E52744
• DIN EN 60747-5-2(VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
Applications:-
• AC mains detection
• Reed relay driving
• Switch mode power supply feedback
• Telephone ring detection
• Logic ground isolation
• Logic coupling with high frequency noise rejection
Specification:-
Related Document:-
4N35 IC Data Sheet
| Symbol | Parameter | Value | Unit |
| VR | Reverse voltage | 6 | V |
| IF | Forward current | 60 | mA |
| IFSM | Surge current | 2.5 | A |
| Pdiss | Power dissipation | 100 | mW |
| VCEO | Collector-emitter breakdown voltage | 70 | V |
| VEBO | Emitter-base breakdown voltage | 7 | V |
| IC | Collector current | 100 | mA |
IC 5LO380R Integrato – KA5L0380R – KA5L0380R sl
Part Number : 5L0380R
Function : Fairchild Power Switch(FPS)
Package : TO-220F-4L Type
Manufacturers : Fairchild Semiconductor
Image
Description
The Fairchild Power Switch(FPS) product family is specially designed for an off-line SMPS with minimal external components. The Fairchild Power Switch(FPS) consists of a high voltage power SenseFET and a current mode PWM IC.
Included PWM controller integrates the fixed frequency oscillator, the under voltage lock-out, the leading edge blanking, the optimized gate turn-on/turn-off driver, the thermal shutdown protection, the over voltage protection, and the temperature compensated precision current sources for the loop compensation and the fault protection circuitry.
Compared to a discrete MOSFET and a PWM controller or an RCCsolution, a Fairchild Power Switch(FPS) can reduce the total component count, design size and weight and at the same time increase efficiency, productivity, and system reliability. It has a basic platform well suited for the cost effective design in either a flyback converter or a forward converter
Block Diagram
Applications
1. SMPS for VCR, SVR, STB, DVD & DVCD
2. SMPS for Printer, Facsimile & Scanner
3. Adaptor for Camcorder
Other data sheets within the file : 5H0380R, 5L0380R, 5LO380R, 5MO380R, KA5H0380R
Description
The Fairchild Power Switch(FPS) product family is specially designed for an off-line SMPS with minimal external components. The Fairchild Power Switch(FPS) consists of a high voltage power SenseFET and a current mode PWM IC.
Included PWM controller integrates the fixed frequency oscillator, the under voltage lock-out, the leading edge blanking, the optimized gate turn-on/turn-off driver, the thermal shutdown protection, the over voltage protection, and the temperature compensated precision current sources for the loop compensation and the fault protection circuitry.
Compared to a discrete MOSFET and a PWM controller or an RCCsolution, a Fairchild Power Switch(FPS) can reduce the total component count, design size and weight and at the same time increase efficiency, productivity, and system reliability. It has a basic platform well suited for the cost effective design in either a flyback converter or a forward converter
Block Diagram
Applications
1. SMPS for VCR, SVR, STB, DVD & DVCD
2. SMPS for Printer, Facsimile & Scanner
3. Adaptor for Camcorder
Other data sheets within the file : 5H0380R, 5L0380R, 5LO380R, 5MO380R, KA5H0380R
5L0380R Datasheet PDF
IC 6N136 EL 6N136 – High Speed Optocoupler
Description
The 6N137 is consists of an infrared emitting diode optically coupled to a high speed integrated photodetector logic gate with a strobe output and packaged in an 8-pin DIP package.
Resources
Extra Information
Brand:
Everlight Electronics
Case/Package:
DIP
Mount:
Through Hole
Number of Pins:
8
Data Rate:
10 Mbps
Direction:
Unidirectional
Fall Time:
75 ns
Forward Current:
50 mA
Forward Voltage:
1.4 V
Isolation Voltage:
5 kV
Max Operating Temperature:
85 C
Max Output Voltage:
7 V
Max Power Dissipation:
100 mW
Min Operating Temperature:
-40 C
Number of Channels:
1
Output Current per Channel:
50 mA
Propagation Delay:
75 ns
Rise Time:
75 ns
Turn-On Delay Time:
75 ns
IC 6N137 EL 6N137 – High Speed Optocoupler
The 6N137 is single channel 10 MBd opto-couplers utilizing a high efficient input LED coupled with an integrated optical photodiode IC detector. The detector has an open drain NMOS-transistor output, providing less leakage compared to an open collector Schottky clamped transistor output. For the single channel type, an enable function on pin 7 allows the detector to be strobed. The use of a 0.1 μF bypass capacitor connected between pin 5 and 8 is recommended.
Features of 6N137 High Speed Opto-coupler:-
- Choice of CMR performance of 15 kV/μs, 5 kV/μs, and 1000 V/μs
- High speed: 10 MBd typical
- +5 V CMOS compatibility
- Pure tin leads
- Guaranteed AC and DC performance over temperature: -40 °C to +100 °C temperature range
- Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S) requirements
- Low input current capability of 5 mA
- Microprocessor system interface
- PLC, ATE input/output isolation
- Computer peripheral interface
- Digital fieldbus isolation: CC-link, DeviceNet, profibus, SDS
- High speed A/D and D/A conversion
- AC plasma display panel level shifting
- Multiplexed data transmission
- Digital control power supply
- Ground loop elimination, noise isolation
IC 74HC139 74LS139 Dual 2-to-4 line Decoder/Demultiplexer IC (74139 IC) DIP-16 Package
The 74LS139 comprises two separate two-line-to-four line decoders in a single package. The active-low enable input can be used as a data line in demultiplexing applications. All of these decoders/demultiplexers feature fully buffered inputs, presenting only one normalized load to its driving circuit. All inputs are clamped with high-performance Schottky diodes to suppress line-ringing and simplify system design.
These Schottky-clamped circuits are designed to be used in high-performance memory-decoding or data-routing applications, requiring very short propagation delay times. In high-performance memory systems these decoders can be used to minimize the effects of system decoding. When used with high-speed memories, the delay times of these decoders are usually less than the typical access time of the memory. This means that the effective system delay introduced by the decoder is negligible.
Features:-
• Designed specifically for high speed: Memory decoders Data transmission systems
• 74LS139 contains two fully independent 2-to-4-line decoders/demultiplexers
• Schottky clamped for high performance
• Typical propagation delay (3 levels of logic) is 21 ns
• Typical power dissipation is 34 mW
Specifications:-
Related Document:-
74LS139 IC Datasheet
| Parameter | Specification |
| Supply Voltage (VCC) | 7 V |
| Input Voltage (VI) | 7 V |
| Operating free-air temperature range | 0°C to +70°C |
| Storage temperature range | –65°C to +150°C |
74LS139 IC Datasheet
IC 74HC164 ST 74HC164 8-Bit Serial In/Parallel out Shift Register IC (74164 IC) DIP-14 Package
74HC164 utilizes advanced silicon-gate CMOS technology. It has the high noise immunity and low consumption of standard CMOS integrated circuits. It also offers speeds comparable to low power Schottky devices. This 8-bit shift register has gated serial inputs and CLEAR.
Each register bit is a D-type master/slave flip-flop. Inputs A & B permit complete control over the incoming data. A LOW at either or both inputs inhibits entry of new data and resets the first flip-flop to the low level at the next clock pulse. A high level on one input enables the other input which will then determine the state of the first flip-flop.
Data at the serial inputs may be changed while the clock is HIGH or LOW, but only information meeting the setup and hold time requirements will be entered. Data is serially shifted in and out of the 8-bit register during the positive going transition of the clock pulse. Clear is independent of the clock and accomplished by a low level at the CLEAR input. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
Features:-
Related Document:-
74HC164 IC Datasheet
- Typical operating frequency: 50 MHz
- Typical propagation delay: 19 ns (clock to Q)
- Wide operating supply voltage range: 2V to 6V
- Low input current: 1 µA maximum
- Low quiescent supply current: 80 µA maximum (74HC Series)
- Fanout of 10 LS-TTL loads
| Parameter | Min | Max | Unit |
| Supply Voltage (VCC) | 2 | 6 | V |
| DC Input or Output Voltage (VIN, VOUT) | 0 | Vcc | V |
| Operating Temperature Range (TA) −4 | -40 | 85 | °C |
| Input Rise or Fall Times | |||
| VCC = 2.0V | 1000 | ns | |
| VCC = 4.5V | 500 | ns | |
| VCC = 6.0V | 400 | ns |
74HC164 IC Datasheet
IC 74HC245 74LS245 3-State Octal Bus Transceiver IC (74245 IC) DIP-20 Package
The 74LS245 octal bus transceivers are designed for asynchronous two-way communication between data buses. The control function implementation minimizes external timing requirements. The device allows data transmission from the A Bus to the B Bus or from the B Bus to the A Bus depending upon the logic level at the direction control (DIR) input. The enable input (G) can be used to disable the device so that the buses are effectively isolated.
Features:-
• Bi-Directional bus transceiver in a high-density 20-pin package
• 3-STATE outputs drive bus lines directly
• PNP inputs reduce DC loading on bus lines
• Hysteresis at bus inputs improve noise margins
• Typical propagation delay times, port-to-port 8 ns
• Typical enable/disable times 17 ns
• IOL (sink current) 24 mA
• IOH (source current) −15 mA
Specifications:-
Related Document:-
74LS245 IC Datasheet
| Parameter | Specification |
| Supply Voltage (VCC) | 7 V |
| Input Voltage (VI) | 7 V |
| Operating free-air temperature range | 0°C to +70°C |
| Storage temperature range | –65°C to +150°C |
74LS245 IC Datasheet
IC 74LS00 74LS00 Quad 2 Input NAND Gate IC (7400 IC) DIP-14 Package
The 74LS00 is a 14 Pin Quad 2-Input NAND Gate IC. This device contains four independent gates each of which performs the logic NAND function. NAND gates utilize advanced silicon-gate CMOS technology to achieve operating speeds with the low power consumption of standard CMOS integrated circuits. All gates have buffered outputs.
All devices have high noise immunity and the ability to drive 10 LS-TTL loads. The 74LS logic family is functionally as well as pin-out compatible with the standard 74HC logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
Features:-
- Four Independent NAND Gates
- 14 Pin IC
- Operating Temperature to 70 C
- High-Speed Low Power CMOS Type
Related Document:-
IC 74LS02 74LS02 Quad 2-Input NOR Gate IC (7402 IC) DIP-14 Package
The 74LS02 is a 14 Pin Quad 2-Input NOR Gate IC. NOR gates utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to HC gates with the low power consumption of standard CMOS integrated circuits. All gates have buffered outputs, providing high noise immunity and the ability to drive 10 LS-TTL loads. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family.
All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
Features:-
- Four Independent NOR Gates
- 14 Pin IC
- Operating Temperature to 70 Deg C
- High-Speed CMOS Type
Related Document:-
IC 74LS04 74LS04 Hex Inverter IC (7404 IC) DIP-14 Package
74LS04 is Hex Inverter NOT gate IC. It consists of six inverters which perform logical invert action. output of an inverter is complement of its input logic state i.e. when input is high its output is low and vice versa. device contains six independent gates each of which performs logic INVERT function. Operating voltage is 5V, high-level input voltage is 2V, and low-level input is 0.8V. Contains absolute maximum ratings over operating free-air temperature range, recommended operating conditions, electrical characteristics over recommended operating free-air temperature range.
Features:-
- 6 Hex Inverters in a 14-Pin DIP Package
- Outputs Directly Interface to CMOS, NMOS and TTL
- Large Operating Voltage Range
- Wide Operating Conditions
- Type: DIP Bipolar
- Voltage Rating: 4.75 to 5.25V
- Current Rating: Max. 16mA Output
- Temperature Rating: 0 to 70Deg C
- Number of: 14 Pins
- Mounting: Through Hole
IC 74LS08
IC CD40106
IC CD4013 HLF
IC IR2110 IR
Features:-
- Floating channel designed for bootstrap operation Fully operational to +500V or +600V Tolerant to negative transient voltage dV/dt immune
- Gate drive supply range from 10 to 20V
- Undervoltage lockout for both channels
- 3.3V logic compatible Separate logic supply range from 3.3V to 20V Logic and power ground ±5V offset
- CMOS Schmitt-triggered inputs with pull-down
- Cycle by cycle edge-triggered shutdown logic
- Matched propagation delay for both channels
- Outputs in phase with inputs
