The integrated circuit is the building block of almost all technology today. It is a small square or rectangle of semiconductor material, often silicon

Showing 1–12 of 78 results

14 Pin DIP IC Socket Base Adaptor (Pack of 5)

15.00
  1. 14 pins.
  2. JDEC compliant.
  3. Molded notch for proper orientation.
  4. Easy to insert and remove ICs.

16 Pin DIP IC Socket Base Adaptor (Pack of 5)

22.49
  1. Features:

    1. 16 pins.
    2. JDEC compliant.
    3. Molded notch for proper orientation.
    4. Easy to insert and remove ICs.

24C08 8 Kbit Serial I2C Bus EEPROM Memory IC

45.99
The Microchip Technology Inc. 24C08 is an 8K or 16K bit Electrically Erasable PROM intended for use in extended/automotive temperature ranges. The device is organized as four or eight blocks of 256 x 8-bit memory with a 2-wire serial interface. The 24C08 also has a page-write capability for up to 16 bytes of data. The 24C08 is available in the standard 8-pin DIP and both 8-lead and 14-lead surface mount SOIC packages.Features:-• Single supply with operation from 4.5-5.5V• Low power CMOS technology - 1 mA active current typical - 10 µA standby current typical at 5.5V• Organized as 4 or 8 blocks of 256 bytes (4 x 256 x 8) or (8 x 256 x 8)• 2-wire serial interface bus, I2C compatible• Schmitt trigger, filtered inputs for noise suppression• Output slope control to eliminate ground bounce• 100 kHz compatibility• Self-timed write cycle (including auto-erase)• Page-write buffer for up to 16 bytes• 2 ms typical write cycle time for page-write• Hardware write protect for entire memory• Can be operated as a serial ROM• ESD protection > 4,000V• 1,000,000 ERASE/WRITE cycles guaranteed• Data retention > 200 years• 8-pin DIP, 8-lead or 14-lead SOIC packages• Available for extended temperature rangeSpecification:-
ParameterSpecification
VCC7.0V
All inputs and outputs w.r.t. VSS-0.6V to VCC +1.0V
Storage temperature-65°C to +150°C
Ambient temperature with power applied-65°C to +125°C
ESD protection on all pins≥ 4 kV
Soldering temperature of leads (10 seconds)300°C
Related Document:-24C08 IC Datasheet
* Product Images are shown for illustrative purposes only and may differ from actual product.

28 Pin DIP IC Socket-Base-Connector for Microcontrollers and IC’s (5 Pieces)

34.99
  1. Features:

    1. 28 pins.
    2. JDEC compliant.
    3. Molded notch for proper orientation.
    4. Easy to insert and remove ICs.

40 Pin DIP IC Socket Base Adaptor (Pack of 5)

45.99
  1. Features:

    1. 40 pins.
    2. JDEC compliant.
    3. Molded notch for proper orientation.
    4. Easy to insert and remove ICs.

6 Pin DIP IC Socket Base Adaptor (Pack of 10)

29.99
    1. 6 pins.
    2. JDEC compliant.
    3. Molded notch for proper orientation.
    4. Easy to insert and remove ICs.

74LS04 Hex Inverter IC

12.00
Features:- 
  • 6 Hex Inverters in a 14-Pin DIP Package
  • Outputs Directly Interface to CMOS, NMOS and TTL
  • Large Operating Voltage Range
  • Wide Operating Conditions
  Specifications:- 
  • Type: DIP Bipolar
  • Voltage Rating: 4.75 to 5.25V
  • Current Rating: Max. 16mA Output
  • Temperature Rating: 0 to 70Deg C
  • Number of: 14 Pins
  • Mounting: Through Hole
 

74LS08 IC

15.00

74LS08 Features

  • Low power consumption
  • Typical Rise Time: 18ns
  • Typical Fall Time: 18ns
  • Operating voltage range: +4.75 to +5.25V
  • Recommended operating voltage: +5V
  • Maximum supply voltage: 7V
  • Maximum current allowed drawing through each gate output: 8mA
  • TTL outputs
  • Operating temperature: 0°C to 70°C
  • Storage Temperature: -65°C to 150°C

75A 1200V SKM75GB12T4 Modules IGBT Semikron

1,850.00

Manufacturer:SEMIKRON
Manufacturer Part No:SKM75GB12T4
Order Code:2423705
Technical Datasheet: SKM75GB12T4   Datasheet

Product Overview

The SKM75GB12T4 is a SEMITRANS® 2 fast IGBT Module for use with AC inverter drives and UPS. It features insulated copper base plate using DBC technology (Direct Bonded Copper) and increased power cycling capability.
  • Half-bridge switch
  • IGBT4 = 4th generation medium fast Trench IGBT (Infineon)
  • CAL4 = Soft switching 4th generation CAL-diode
  • Integrated gate resistor
  • For higher switching frequencies up to 12kHz
  • UL recognized, file number E63532

Applications

Power Management, Maintenance & Repair

8 Pin DIP IC Socket Base Adaptor (Pack of 10)

44.99
    1. Features: 8 pins. JDEC compliant. Molded notch for proper orientation. Easy to insert and remove ICs.

CD4017 CD4017BE 4017 Decade Counter Divider IC Pack of 5PCS

99.00
  • CD4017 Decad Counter IC With 16 Pin IC Base Free The CD4017B is a 5-stage Johnson counter with 10 decoded outputs. Inputs include a CLOCK, a RESET, and a CLOCK INHIBIT signal. Schmitt trigger action in the CLOCK input circuit provides pulse shaping that allows unlimited clock input pulse rise and fall times.
  • Decade counter IC - 4017
  • Branded New IC'S -5PCS

CD4093 Quad 2-Input NAND Schmitt Trigger IC DIP-14

15.00
  • Schmitt-trigger action on each input with no external components
  • Hysteresis voltage typically 0.9 V at VDD = 5 V and 2.3 V at VDD = 10 V
  • Noise immunity greater than 50%
  • No limit on input rise and fall times
  • Standardized, symmetrical output characteristics
  • 100% tested for quiescent current at 20 V
  • Maximum input current of 1 µA at 18 V over full package-temperature range, 100 nA at 18 V and 25°C
  • 5-V, 10-V, and 15-V parametric ratings
  • Meets all requirements of JEDEC Tentative Standard No. 13B, "Standard Specifications for Description of ''B'' Series CMOS Devices"
  • Applications:
    • Wave and pulse shapers
    • High-noise-environment systems
    • Monostable multivibrators
    • Astable multivibrators
    • NAND logic