Showing 25–48 of 290 results

24C08 8 Kbit Serial I2C Bus EEPROM Memory IC

45.99
The Microchip Technology Inc. 24C08 is an 8K or 16K bit Electrically Erasable PROM intended for use in extended/automotive temperature ranges. The device is organized as four or eight blocks of 256 x 8-bit memory with a 2-wire serial interface. The 24C08 also has a page-write capability for up to 16 bytes of data. The 24C08 is available in the standard 8-pin DIP and both 8-lead and 14-lead surface mount SOIC packages. Features:- • Single supply with operation from 4.5-5.5V • Low power CMOS technology - 1 mA active current typical - 10 µA standby current typical at 5.5V • Organized as 4 or 8 blocks of 256 bytes (4 x 256 x 8) or (8 x 256 x 8) • 2-wire serial interface bus, I2C compatible • Schmitt trigger, filtered inputs for noise suppression • Output slope control to eliminate ground bounce • 100 kHz compatibility • Self-timed write cycle (including auto-erase) • Page-write buffer for up to 16 bytes • 2 ms typical write cycle time for page-write • Hardware write protect for entire memory • Can be operated as a serial ROM • ESD protection > 4,000V • 1,000,000 ERASE/WRITE cycles guaranteed • Data retention > 200 years • 8-pin DIP, 8-lead or 14-lead SOIC packages • Available for extended temperature range Specification:-
Parameter Specification
VCC 7.0V
All inputs and outputs w.r.t. VSS -0.6V to VCC +1.0V
Storage temperature -65°C to +150°C
Ambient temperature with power applied -65°C to +125°C
ESD protection on all pins ≥ 4 kV
Soldering temperature of leads (10 seconds) 300°C
Related Document:- 24C08 IC Datasheet
* Product Images are shown for illustrative purposes only and may differ from actual product.

28 Pin DIP IC Socket-Base-Connector for Microcontrollers and IC’s (5 Pieces)

34.99
  1. Features:

    1. 28 pins.
    2. JDEC compliant.
    3. Molded notch for proper orientation.
    4. Easy to insert and remove ICs.

40 Pin DIP IC Socket Base Adaptor (Pack of 5)

45.99
  1. Features:

    1. 40 pins.
    2. JDEC compliant.
    3. Molded notch for proper orientation.
    4. Easy to insert and remove ICs.

40AMP CURRENT TRANSFORMER, 1:1200, Pcb Mount -(with Casing) (CT 40AMS CT 1200T)

149.00

Product Description

  • Designed and developed as per European Standards IEC : 62053-21 / IS: 13779 , IEC : 60044-1 Part-1.
  • Ideal for Electronic Safety Control Gear design ,
  • Overload Sensing , Furnace Temperature Control ,
  • Motor Speed Control , Instrument Transformer ,
  • Energy Metering ,
  • Power Quality Monitoring.
  • Home Automation Devices
  • Earth Leakage Circuit Braker CT ( ELCB CT )
  • Residual Current Circuit Braker CT ( RCCB CT )
  • Ground Fault Interruptor CT ( GFI CT )
  • Variants available in Self Wire (Flying Leads) or PCB Mounting Type CT.

Product Image

Shah 2 AMP CURRENT TRANSFORMER, 1:550, Pcb Mount -(with Casing)

5AMP CURRENT TRANSFORMER, 1:1200, Pcb Mount -(with Casing) (CT 5A/1200T SHA)

68.00

Product Description

  • Designed and developed as per European Standards IEC : 62053-21 / IS: 13779 , IEC : 60044-1 Part-1.
  • Ideal for Electronic Safety Control Gear design ,
  • Overload Sensing , Furnace Temperature Control ,
  • Motor Speed Control , Instrument Transformer ,
  • Energy Metering ,
  • Power Quality Monitoring.
  • Home Automation Devices
  • Earth Leakage Circuit Braker CT ( ELCB CT )
  • Residual Current Circuit Braker CT ( RCCB CT )
  • Ground Fault Interruptor CT ( GFI CT )
  • Variants available in Self Wire (Flying Leads) or PCB Mounting Type CT.

Product Image

Shah 2 AMP CURRENT TRANSFORMER, 1:550, Pcb Mount -(with Casing)

6 Pin DIP IC Socket Base Adaptor (Pack of 10)

29.99
    1. 6 pins.
    2. JDEC compliant.
    3. Molded notch for proper orientation.
    4. Easy to insert and remove ICs.

63D-12-1CE RELAY 12V 30A OEN

99.99
Arduino Uno Rev3 Code: A000066 / Barcode: 7630049200050 Nunc per mollis pot enti amet imperdiet blandit dis eu sociosqu accumsan

75A 1200V SKM75GB12T4 Modules IGBT Semikron

1,850.00

Manufacturer:SEMIKRON
Manufacturer Part No:SKM75GB12T4
Order Code:2423705
Technical Datasheet: SKM75GB12T4   Datasheet

Product Overview

The SKM75GB12T4 is a SEMITRANS® 2 fast IGBT Module for use with AC inverter drives and UPS. It features insulated copper base plate using DBC technology (Direct Bonded Copper) and increased power cycling capability.
  • Half-bridge switch
  • IGBT4 = 4th generation medium fast Trench IGBT (Infineon)
  • CAL4 = Soft switching 4th generation CAL-diode
  • Integrated gate resistor
  • For higher switching frequencies up to 12kHz
  • UL recognized, file number E63532

Applications

Power Management, Maintenance & Repair

7805 Voltage Regulator IC LM7805 12v to 5v Regulator for Multiple Applications (Pack of 10)

170.00
Arduino Uno Rev3 Code: A000066 / Barcode: 7630049200050 Nunc per mollis pot enti amet imperdiet blandit dis eu sociosqu accumsan

7D/431-275V MOV

2.99
  • Technical Specification:
    • Model : 7D431K
    • Mounting Type : Through Hole
    • Varistor Voltage : 430V
    • Tolerance : ±10%
    • Element Diameter : 10mm
    • Operating Temperature : -40°C to 105°C
    • Maximum Clamping Voltage : 845V @ 25A
    • Rated Power : 0.4W
    • Capacitance : 400pF
    • AC Vrms : 275V
    • DC Voltage : 350V
    • Features:
      • High voltage rating
      • High current rating
      • Bidirectional
      • Surge protection
      • Fast response time
      Pin Description: Applications:
      • Power supplies
      • Power systems
      • Line voltage
      • Telecom systems
      • White goods / appliances

8 Pin DIP IC Socket Base Adaptor (Pack of 10)

44.99
    1. Features: 8 pins. JDEC compliant. Molded notch for proper orientation. Easy to insert and remove ICs.

Aluminium Electrolytic Capacitor 4700 Mfd/450 Volt

2,550.00
Capacitor Type Aluminium Electrolytic
Voltage Rating 450 V
Capacitance 1-50 uf
Power (Kilo-Volt-Ampere) 4700 MFD
Brand Epcos
Condition New
Minimum Order Quantity 1 Piece

Amptek: 12 Volt 4.5 Amp Rechargeable Sealed Lead Acid Battery

999.00

Arduino Nano V3

375.00
Description:- Arduino NANO Version 3 is the open source smallest Embedded Development board launched by Arduino based on Atmega328 SMD Package Microcontroller. It is a Surface mount Breadboard Friendly board integrated with Mini USB Port. DC Power Jack is not available on this Board, so power can be given through Mini USB Cable. It automatically sense and switch to the higher potential source of power, there is no need for the power select jumper. Specifications:-  
  • Microcontroller                        Atmel ATmega328 SMD Package
  • Operating Voltage (logic level)  5 V
  • Input Voltage (recommended)  7-12 V
  • Input Voltage (limits)               6-20 V
  • Digital I/O Pins                        14 (of which 6 provide PWM output)
  • Analog Input Pins                    8
  • DC Current per I/O Pin            40 mA
  • Flash Memory                         32 KB (of which 2KB used by bootloader)
  • SRAM                                     2 KB
  • EEPROM                                 1 KB
  • Clock Speed                           16 MHz
  • Dimensions                            0.70” x 1.70”