Resistors
Connectors
Capacitors
Wires and Connectors
Semiconductors - ICs
DAC0800 8-Bit Digital to Analog D/A Converter IC
- Fast Settling Output Current: 100 ns
- Full Scale Error: ±1 LSB
- Non linearity Over Temperature: ±0.1%
- Full Scale Current Drift: ±10 ppm/°C
- High Output Compliance: −10 V to +18 V
- Complementary Current Outputs
- Interface Directly with TTL, CMOS, PMOS and Others
- 2 Quadrant Wide Range Multiplying Capability
- Wide Power Supply Range: ±4.5 V to ±18 V
- Low Power Consumption: 33 m W at ±5 V
- Low Cost
DB107 1 Amp Bridge Rectifier
Features:-• Glass passivated die construction• Low forward voltage drop• High current capability• High surge current capability• Plastic material-UL flammability 94V-0• This is a Pb − Free Device• “-HF” suffix is for Halogen Free Device• All SMC parts are traceable to the wafer lot• Additional testing can be offered upon requestSpecification:-
| Symbol | Parameter | Value | Units |
| VRRM | Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage | 1000 | V |
| VRWM | |||
| VR | |||
| VRMS | RMS Reverse Voltage | 700 | V |
| IF(AV) | Average Forward Output Current (Note 1) @ TC =100°C | 1 | A |
| IFSM | Non-Repetitive Peak Forward Surge Current 8.3ms | 45 | A |
| Single half sine-wave superimposed on rated load | |||
| I2 t | I2t Rating for Fusing (t < 8.3ms) | 8.404 | A 2s |
EL817 Optocoupler – Transistor Output
FAN7392 High-Current, High- & Low-Side, Gate-Drive IC
Features:-
- Floating Channel for Bootstrap Operation to +600V
- 3AJ3A Sourcing/Sinking Current Driving Capability
- Common-Mode dv/dt Noise Canceling Circuit
- 3.3V Logic Compatible Separate Logic Supply (VDD) Range from 3.3V to 20V
- Under-Voltage Lockout for vcc and VBS Cycle-by-Cycle Edge-Triggered Shutdown Logic
- Matched Propagation Delay for Both Channels
- Outputs In-phase with Input Signal
HLF DIP Cd4001be Integrated Circuit, For Power
IC 24C04 ATMEL Atmel 24C16A/24C16 8 Pin Dil/Dip 16K Serial Eeprom
MICROCHIP (ATMEL) | ||
EEPROM memory | ||
EEPROM | ||
SPI | ||
128x8bit | ||
20MHz | ||
SMD | ||
SO8 | ||
1kb | ||
series | ||
-40...125°C | ||
1M | ||
5ms | ||
1.8...5.5V |
- Gross weight: 0.072g
- Manufacturer part number: AT25010B-SSHL-B
Items sensitive to electrostatic charges are packed while maintaining safety measures in a special ESD area. Elements are packaged on anti-static roller tracks or blister-packed with a static-dissipating sponge. All products in the special ESD area are also packed in shielding bags.
IC 4N33 4N35 IC – Optocoupler Phototransistor IC
The 4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. The couplers are Underwriters Laboratories (UL) listed to comply with a 5300 VRMS isolation test voltage.This isolation performance is accomplished through double molding isolation manufacturing process. Comliance to DIN EN 60747-5-2(VDE0884)/ DIN EN 60747-5-5 pending partial discharge isolation specification is available for these families by ordering option 1.These isolation processes and the ISO9001 quality program results in the highest isolation performance available for a commecial plastic phototransistor optocoupler. The devices are available in lead formed configuration suitable for surface mounting and are available either on tape and reel, or in standard tube shipping containers.Features:-• Isolation Test Voltage 5300 VRMS• Interfaces with common logic families• Input-output coupling capacitance < 0.5 pF• Industry Standard Dual-in line 6-pin packageAgency Approvals:- • Underwriters Laboratory File #E52744• DIN EN 60747-5-2(VDE0884)DIN EN 60747-5-5 pendingAvailable with Option 1Applications:- • AC mains detection• Reed relay driving• Switch mode power supply feedback• Telephone ring detection• Logic ground isolation• Logic coupling with high frequency noise rejectionSpecification:-
Related Document:-
4N35 IC Data Sheet
| Symbol | Parameter | Value | Unit |
| VR | Reverse voltage | 6 | V |
| IF | Forward current | 60 | mA |
| IFSM | Surge current | 2.5 | A |
| Pdiss | Power dissipation | 100 | mW |
| VCEO | Collector-emitter breakdown voltage | 70 | V |
| VEBO | Emitter-base breakdown voltage | 7 | V |
| IC | Collector current | 100 | mA |
IC 4N35 OPTO 4N35 IC – Optocoupler Phototransistor IC
The 4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. The couplers are Underwriters Laboratories (UL) listed to comply with a 5300 VRMS isolation test voltage.This isolation performance is accomplished through double molding isolation manufacturing process. Comliance to DIN EN 60747-5-2(VDE0884)/ DIN EN 60747-5-5 pending partial discharge isolation specification is available for these families by ordering option 1.These isolation processes and the ISO9001 quality program results in the highest isolation performance available for a commecial plastic phototransistor optocoupler. The devices are available in lead formed configuration suitable for surface mounting and are available either on tape and reel, or in standard tube shipping containers.Features:-• Isolation Test Voltage 5300 VRMS• Interfaces with common logic families• Input-output coupling capacitance < 0.5 pF• Industry Standard Dual-in line 6-pin packageAgency Approvals:- • Underwriters Laboratory File #E52744• DIN EN 60747-5-2(VDE0884)DIN EN 60747-5-5 pendingAvailable with Option 1Applications:- • AC mains detection• Reed relay driving• Switch mode power supply feedback• Telephone ring detection• Logic ground isolation• Logic coupling with high frequency noise rejectionSpecification:-
Related Document:- 4N35 IC Data Sheet
| Symbol | Parameter | Value | Unit |
| VR | Reverse voltage | 6 | V |
| IF | Forward current | 60 | mA |
| IFSM | Surge current | 2.5 | A |
| Pdiss | Power dissipation | 100 | mW |
| VCEO | Collector-emitter breakdown voltage | 70 | V |
| VEBO | Emitter-base breakdown voltage | 7 | V |
| IC | Collector current | 100 | mA |
IC 5LO380R Integrato – KA5L0380R – KA5L0380R sl
Part Number : 5L0380RFunction : Fairchild Power Switch(FPS)Package : TO-220F-4L TypeManufacturers : Fairchild SemiconductorImage
DescriptionThe Fairchild Power Switch(FPS) product family is specially designed for an off-line SMPS with minimal external components. The Fairchild Power Switch(FPS) consists of a high voltage power SenseFET and a current mode PWM IC.Included PWM controller integrates the fixed frequency oscillator, the under voltage lock-out, the leading edge blanking, the optimized gate turn-on/turn-off driver, the thermal shutdown protection, the over voltage protection, and the temperature compensated precision current sources for the loop compensation and the fault protection circuitry.Compared to a discrete MOSFET and a PWM controller or an RCCsolution, a Fairchild Power Switch(FPS) can reduce the total component count, design size and weight and at the same time increase efficiency, productivity, and system reliability. It has a basic platform well suited for the cost effective design in either a flyback converter or a forward converterBlock Diagram
Applications1. SMPS for VCR, SVR, STB, DVD & DVCD
2. SMPS for Printer, Facsimile & Scanner
3. Adaptor for CamcorderOther data sheets within the file : 5H0380R, 5L0380R, 5LO380R, 5MO380R, KA5H0380R
DescriptionThe Fairchild Power Switch(FPS) product family is specially designed for an off-line SMPS with minimal external components. The Fairchild Power Switch(FPS) consists of a high voltage power SenseFET and a current mode PWM IC.Included PWM controller integrates the fixed frequency oscillator, the under voltage lock-out, the leading edge blanking, the optimized gate turn-on/turn-off driver, the thermal shutdown protection, the over voltage protection, and the temperature compensated precision current sources for the loop compensation and the fault protection circuitry.Compared to a discrete MOSFET and a PWM controller or an RCCsolution, a Fairchild Power Switch(FPS) can reduce the total component count, design size and weight and at the same time increase efficiency, productivity, and system reliability. It has a basic platform well suited for the cost effective design in either a flyback converter or a forward converterBlock Diagram
Applications1. SMPS for VCR, SVR, STB, DVD & DVCD
2. SMPS for Printer, Facsimile & Scanner
3. Adaptor for CamcorderOther data sheets within the file : 5H0380R, 5L0380R, 5LO380R, 5MO380R, KA5H0380R5L0380R Datasheet PDF
IC 6N136 EL 6N136 – High Speed Optocoupler
Description
The 6N137 is consists of an infrared emitting diode optically coupled to a high speed integrated photodetector logic gate with a strobe output and packaged in an 8-pin DIP package.
Resources
Extra Information
Brand:
Everlight Electronics
Case/Package:
DIP
Mount:
Through Hole
Number of Pins:
8
Data Rate:
10 Mbps
Direction:
Unidirectional
Fall Time:
75 ns
Forward Current:
50 mA
Forward Voltage:
1.4 V
Isolation Voltage:
5 kV
Max Operating Temperature:
85 C
Max Output Voltage:
7 V
Max Power Dissipation:
100 mW
Min Operating Temperature:
-40 C
Number of Channels:
1
Output Current per Channel:
50 mA
Propagation Delay:
75 ns
Rise Time:
75 ns
Turn-On Delay Time:
75 ns
