Resistors
Connectors
Capacitors
Wires and Connectors
Semiconductors - ICs
DB107 1 Amp Bridge Rectifier
Features:-
• Glass passivated die construction
• Low forward voltage drop
• High current capability
• High surge current capability
• Plastic material-UL flammability 94V-0
• This is a Pb − Free Device
• “-HF” suffix is for Halogen Free Device
• All SMC parts are traceable to the wafer lot
• Additional testing can be offered upon request
Specification:-
| Symbol | Parameter | Value | Units |
| VRRM | Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage | 1000 | V |
| VRWM | |||
| VR | |||
| VRMS | RMS Reverse Voltage | 700 | V |
| IF(AV) | Average Forward Output Current (Note 1) @ TC =100°C | 1 | A |
| IFSM | Non-Repetitive Peak Forward Surge Current 8.3ms | 45 | A |
| Single half sine-wave superimposed on rated load | |||
| I2 t | I2t Rating for Fusing (t < 8.3ms) | 8.404 | A 2s |
EL817 Optocoupler – Transistor Output
FAN7392 High-Current, High- & Low-Side, Gate-Drive IC
Features:-
- Floating Channel for Bootstrap Operation to +600V
- 3AJ3A Sourcing/Sinking Current Driving Capability
- Common-Mode dv/dt Noise Canceling Circuit
- 3.3V Logic Compatible Separate Logic Supply (VDD) Range from 3.3V to 20V
- Under-Voltage Lockout for vcc and VBS Cycle-by-Cycle Edge-Triggered Shutdown Logic
- Matched Propagation Delay for Both Channels
- Outputs In-phase with Input Signal
HLF DIP Cd4001be Integrated Circuit, For Power
IC 24C04 ATMEL Atmel 24C16A/24C16 8 Pin Dil/Dip 16K Serial Eeprom
|
MICROCHIP (ATMEL) |
||
|
EEPROM memory |
||
|
EEPROM |
||
|
SPI |
||
|
128x8bit |
||
|
20MHz |
||
|
SMD |
||
|
SO8 |
||
|
1kb |
||
|
series |
||
|
-40...125°C |
||
|
1M |
||
|
5ms |
||
|
1.8...5.5V |
- Gross weight: 0.072g
- Manufacturer part number: AT25010B-SSHL-B
Items sensitive to electrostatic charges are packed while maintaining safety measures in a special ESD area. Elements are packaged on anti-static roller tracks or blister-packed with a static-dissipating sponge. All products in the special ESD area are also packed in shielding bags.
IC 4N33 4N35 IC – Optocoupler Phototransistor IC
The 4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. The couplers are Underwriters Laboratories (UL) listed to comply with a 5300 VRMS isolation test voltage.
This isolation performance is accomplished through double molding isolation manufacturing process. Comliance to DIN EN 60747-5-2(VDE0884)/ DIN EN 60747-5-5 pending partial discharge isolation specification is available for these families by ordering option 1.
These isolation processes and the ISO9001 quality program results in the highest isolation performance available for a commecial plastic phototransistor optocoupler. The devices are available in lead formed configuration suitable for surface mounting and are available either on tape and reel, or in standard tube shipping containers.
Features:-
• Isolation Test Voltage 5300 VRMS
• Interfaces with common logic families
• Input-output coupling capacitance < 0.5 pF
• Industry Standard Dual-in line 6-pin package
Agency Approvals:-
• Underwriters Laboratory File #E52744
• DIN EN 60747-5-2(VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
Applications:-
• AC mains detection
• Reed relay driving
• Switch mode power supply feedback
• Telephone ring detection
• Logic ground isolation
• Logic coupling with high frequency noise rejection
Specification:-
Related Document:-
4N35 IC Data Sheet
| Symbol | Parameter | Value | Unit |
| VR | Reverse voltage | 6 | V |
| IF | Forward current | 60 | mA |
| IFSM | Surge current | 2.5 | A |
| Pdiss | Power dissipation | 100 | mW |
| VCEO | Collector-emitter breakdown voltage | 70 | V |
| VEBO | Emitter-base breakdown voltage | 7 | V |
| IC | Collector current | 100 | mA |
IC 4N35 OPTO 4N35 IC – Optocoupler Phototransistor IC
The 4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. The couplers are Underwriters Laboratories (UL) listed to comply with a 5300 VRMS isolation test voltage.
This isolation performance is accomplished through double molding isolation manufacturing process. Comliance to DIN EN 60747-5-2(VDE0884)/ DIN EN 60747-5-5 pending partial discharge isolation specification is available for these families by ordering option 1.
These isolation processes and the ISO9001 quality program results in the highest isolation performance available for a commecial plastic phototransistor optocoupler. The devices are available in lead formed configuration suitable for surface mounting and are available either on tape and reel, or in standard tube shipping containers.
Features:-
• Isolation Test Voltage 5300 VRMS
• Interfaces with common logic families
• Input-output coupling capacitance < 0.5 pF
• Industry Standard Dual-in line 6-pin package
Agency Approvals:-
• Underwriters Laboratory File #E52744
• DIN EN 60747-5-2(VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
Applications:-
• AC mains detection
• Reed relay driving
• Switch mode power supply feedback
• Telephone ring detection
• Logic ground isolation
• Logic coupling with high frequency noise rejection
Specification:-
Related Document:-
4N35 IC Data Sheet
| Symbol | Parameter | Value | Unit |
| VR | Reverse voltage | 6 | V |
| IF | Forward current | 60 | mA |
| IFSM | Surge current | 2.5 | A |
| Pdiss | Power dissipation | 100 | mW |
| VCEO | Collector-emitter breakdown voltage | 70 | V |
| VEBO | Emitter-base breakdown voltage | 7 | V |
| IC | Collector current | 100 | mA |
IC 5LO380R Integrato – KA5L0380R – KA5L0380R sl
Part Number : 5L0380R
Function : Fairchild Power Switch(FPS)
Package : TO-220F-4L Type
Manufacturers : Fairchild Semiconductor
Image
Description
The Fairchild Power Switch(FPS) product family is specially designed for an off-line SMPS with minimal external components. The Fairchild Power Switch(FPS) consists of a high voltage power SenseFET and a current mode PWM IC.
Included PWM controller integrates the fixed frequency oscillator, the under voltage lock-out, the leading edge blanking, the optimized gate turn-on/turn-off driver, the thermal shutdown protection, the over voltage protection, and the temperature compensated precision current sources for the loop compensation and the fault protection circuitry.
Compared to a discrete MOSFET and a PWM controller or an RCCsolution, a Fairchild Power Switch(FPS) can reduce the total component count, design size and weight and at the same time increase efficiency, productivity, and system reliability. It has a basic platform well suited for the cost effective design in either a flyback converter or a forward converter
Block Diagram
Applications
1. SMPS for VCR, SVR, STB, DVD & DVCD
2. SMPS for Printer, Facsimile & Scanner
3. Adaptor for Camcorder
Other data sheets within the file : 5H0380R, 5L0380R, 5LO380R, 5MO380R, KA5H0380R
Description
The Fairchild Power Switch(FPS) product family is specially designed for an off-line SMPS with minimal external components. The Fairchild Power Switch(FPS) consists of a high voltage power SenseFET and a current mode PWM IC.
Included PWM controller integrates the fixed frequency oscillator, the under voltage lock-out, the leading edge blanking, the optimized gate turn-on/turn-off driver, the thermal shutdown protection, the over voltage protection, and the temperature compensated precision current sources for the loop compensation and the fault protection circuitry.
Compared to a discrete MOSFET and a PWM controller or an RCCsolution, a Fairchild Power Switch(FPS) can reduce the total component count, design size and weight and at the same time increase efficiency, productivity, and system reliability. It has a basic platform well suited for the cost effective design in either a flyback converter or a forward converter
Block Diagram
Applications
1. SMPS for VCR, SVR, STB, DVD & DVCD
2. SMPS for Printer, Facsimile & Scanner
3. Adaptor for Camcorder
Other data sheets within the file : 5H0380R, 5L0380R, 5LO380R, 5MO380R, KA5H0380R
5L0380R Datasheet PDF
IC 6N136 EL 6N136 – High Speed Optocoupler
Description
The 6N137 is consists of an infrared emitting diode optically coupled to a high speed integrated photodetector logic gate with a strobe output and packaged in an 8-pin DIP package.
Resources
Extra Information
Brand:
Everlight Electronics
Case/Package:
DIP
Mount:
Through Hole
Number of Pins:
8
Data Rate:
10 Mbps
Direction:
Unidirectional
Fall Time:
75 ns
Forward Current:
50 mA
Forward Voltage:
1.4 V
Isolation Voltage:
5 kV
Max Operating Temperature:
85 C
Max Output Voltage:
7 V
Max Power Dissipation:
100 mW
Min Operating Temperature:
-40 C
Number of Channels:
1
Output Current per Channel:
50 mA
Propagation Delay:
75 ns
Rise Time:
75 ns
Turn-On Delay Time:
75 ns
IC 6N137 EL 6N137 – High Speed Optocoupler
The 6N137 is single channel 10 MBd opto-couplers utilizing a high efficient input LED coupled with an integrated optical photodiode IC detector. The detector has an open drain NMOS-transistor output, providing less leakage compared to an open collector Schottky clamped transistor output. For the single channel type, an enable function on pin 7 allows the detector to be strobed. The use of a 0.1 μF bypass capacitor connected between pin 5 and 8 is recommended.
Features of 6N137 High Speed Opto-coupler:-
- Choice of CMR performance of 15 kV/μs, 5 kV/μs, and 1000 V/μs
- High speed: 10 MBd typical
- +5 V CMOS compatibility
- Pure tin leads
- Guaranteed AC and DC performance over temperature: -40 °C to +100 °C temperature range
- Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S) requirements
- Low input current capability of 5 mA
- Microprocessor system interface
- PLC, ATE input/output isolation
- Computer peripheral interface
- Digital fieldbus isolation: CC-link, DeviceNet, profibus, SDS
- High speed A/D and D/A conversion
- AC plasma display panel level shifting
- Multiplexed data transmission
- Digital control power supply
- Ground loop elimination, noise isolation
