Resistors
Connectors
Capacitors
Wires and Connectors
IC's
FAN7392 High-Current, High- & Low-Side, Gate-Drive IC
Features:-
- Floating Channel for Bootstrap Operation to +600V
- 3AJ3A Sourcing/Sinking Current Driving Capability
- Common-Mode dv/dt Noise Canceling Circuit
- 3.3V Logic Compatible Separate Logic Supply (VDD) Range from 3.3V to 20V
- Under-Voltage Lockout for vcc and VBS Cycle-by-Cycle Edge-Triggered Shutdown Logic
- Matched Propagation Delay for Both Channels
- Outputs In-phase with Input Signal
HLF DIP Cd4001be Integrated Circuit, For Power
IC 24C04 ATMEL Atmel 24C16A/24C16 8 Pin Dil/Dip 16K Serial Eeprom
|
MICROCHIP (ATMEL) |
||
|
EEPROM memory |
||
|
EEPROM |
||
|
SPI |
||
|
128x8bit |
||
|
20MHz |
||
|
SMD |
||
|
SO8 |
||
|
1kb |
||
|
series |
||
|
-40...125°C |
||
|
1M |
||
|
5ms |
||
|
1.8...5.5V |
- Gross weight: 0.072g
- Manufacturer part number: AT25010B-SSHL-B
Items sensitive to electrostatic charges are packed while maintaining safety measures in a special ESD area. Elements are packaged on anti-static roller tracks or blister-packed with a static-dissipating sponge. All products in the special ESD area are also packed in shielding bags.
IC 5LO380R Integrato – KA5L0380R – KA5L0380R sl
Part Number : 5L0380R
Function : Fairchild Power Switch(FPS)
Package : TO-220F-4L Type
Manufacturers : Fairchild Semiconductor
Image
Description
The Fairchild Power Switch(FPS) product family is specially designed for an off-line SMPS with minimal external components. The Fairchild Power Switch(FPS) consists of a high voltage power SenseFET and a current mode PWM IC.
Included PWM controller integrates the fixed frequency oscillator, the under voltage lock-out, the leading edge blanking, the optimized gate turn-on/turn-off driver, the thermal shutdown protection, the over voltage protection, and the temperature compensated precision current sources for the loop compensation and the fault protection circuitry.
Compared to a discrete MOSFET and a PWM controller or an RCCsolution, a Fairchild Power Switch(FPS) can reduce the total component count, design size and weight and at the same time increase efficiency, productivity, and system reliability. It has a basic platform well suited for the cost effective design in either a flyback converter or a forward converter
Block Diagram
Applications
1. SMPS for VCR, SVR, STB, DVD & DVCD
2. SMPS for Printer, Facsimile & Scanner
3. Adaptor for Camcorder
Other data sheets within the file : 5H0380R, 5L0380R, 5LO380R, 5MO380R, KA5H0380R
Description
The Fairchild Power Switch(FPS) product family is specially designed for an off-line SMPS with minimal external components. The Fairchild Power Switch(FPS) consists of a high voltage power SenseFET and a current mode PWM IC.
Included PWM controller integrates the fixed frequency oscillator, the under voltage lock-out, the leading edge blanking, the optimized gate turn-on/turn-off driver, the thermal shutdown protection, the over voltage protection, and the temperature compensated precision current sources for the loop compensation and the fault protection circuitry.
Compared to a discrete MOSFET and a PWM controller or an RCCsolution, a Fairchild Power Switch(FPS) can reduce the total component count, design size and weight and at the same time increase efficiency, productivity, and system reliability. It has a basic platform well suited for the cost effective design in either a flyback converter or a forward converter
Block Diagram
Applications
1. SMPS for VCR, SVR, STB, DVD & DVCD
2. SMPS for Printer, Facsimile & Scanner
3. Adaptor for Camcorder
Other data sheets within the file : 5H0380R, 5L0380R, 5LO380R, 5MO380R, KA5H0380R
5L0380R Datasheet PDF
IC 74HC139 74LS139 Dual 2-to-4 line Decoder/Demultiplexer IC (74139 IC) DIP-16 Package
The 74LS139 comprises two separate two-line-to-four line decoders in a single package. The active-low enable input can be used as a data line in demultiplexing applications. All of these decoders/demultiplexers feature fully buffered inputs, presenting only one normalized load to its driving circuit. All inputs are clamped with high-performance Schottky diodes to suppress line-ringing and simplify system design.
These Schottky-clamped circuits are designed to be used in high-performance memory-decoding or data-routing applications, requiring very short propagation delay times. In high-performance memory systems these decoders can be used to minimize the effects of system decoding. When used with high-speed memories, the delay times of these decoders are usually less than the typical access time of the memory. This means that the effective system delay introduced by the decoder is negligible.
Features:-
• Designed specifically for high speed: Memory decoders Data transmission systems
• 74LS139 contains two fully independent 2-to-4-line decoders/demultiplexers
• Schottky clamped for high performance
• Typical propagation delay (3 levels of logic) is 21 ns
• Typical power dissipation is 34 mW
Specifications:-
Related Document:-
74LS139 IC Datasheet
| Parameter | Specification |
| Supply Voltage (VCC) | 7 V |
| Input Voltage (VI) | 7 V |
| Operating free-air temperature range | 0°C to +70°C |
| Storage temperature range | –65°C to +150°C |
74LS139 IC Datasheet
IC 74HC164 ST 74HC164 8-Bit Serial In/Parallel out Shift Register IC (74164 IC) DIP-14 Package
74HC164 utilizes advanced silicon-gate CMOS technology. It has the high noise immunity and low consumption of standard CMOS integrated circuits. It also offers speeds comparable to low power Schottky devices. This 8-bit shift register has gated serial inputs and CLEAR.
Each register bit is a D-type master/slave flip-flop. Inputs A & B permit complete control over the incoming data. A LOW at either or both inputs inhibits entry of new data and resets the first flip-flop to the low level at the next clock pulse. A high level on one input enables the other input which will then determine the state of the first flip-flop.
Data at the serial inputs may be changed while the clock is HIGH or LOW, but only information meeting the setup and hold time requirements will be entered. Data is serially shifted in and out of the 8-bit register during the positive going transition of the clock pulse. Clear is independent of the clock and accomplished by a low level at the CLEAR input. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
Features:-
Related Document:-
74HC164 IC Datasheet
- Typical operating frequency: 50 MHz
- Typical propagation delay: 19 ns (clock to Q)
- Wide operating supply voltage range: 2V to 6V
- Low input current: 1 µA maximum
- Low quiescent supply current: 80 µA maximum (74HC Series)
- Fanout of 10 LS-TTL loads
| Parameter | Min | Max | Unit |
| Supply Voltage (VCC) | 2 | 6 | V |
| DC Input or Output Voltage (VIN, VOUT) | 0 | Vcc | V |
| Operating Temperature Range (TA) −4 | -40 | 85 | °C |
| Input Rise or Fall Times | |||
| VCC = 2.0V | 1000 | ns | |
| VCC = 4.5V | 500 | ns | |
| VCC = 6.0V | 400 | ns |
74HC164 IC Datasheet
IC 74HC245 74LS245 3-State Octal Bus Transceiver IC (74245 IC) DIP-20 Package
The 74LS245 octal bus transceivers are designed for asynchronous two-way communication between data buses. The control function implementation minimizes external timing requirements. The device allows data transmission from the A Bus to the B Bus or from the B Bus to the A Bus depending upon the logic level at the direction control (DIR) input. The enable input (G) can be used to disable the device so that the buses are effectively isolated.
Features:-
• Bi-Directional bus transceiver in a high-density 20-pin package
• 3-STATE outputs drive bus lines directly
• PNP inputs reduce DC loading on bus lines
• Hysteresis at bus inputs improve noise margins
• Typical propagation delay times, port-to-port 8 ns
• Typical enable/disable times 17 ns
• IOL (sink current) 24 mA
• IOH (source current) −15 mA
Specifications:-
Related Document:-
74LS245 IC Datasheet
| Parameter | Specification |
| Supply Voltage (VCC) | 7 V |
| Input Voltage (VI) | 7 V |
| Operating free-air temperature range | 0°C to +70°C |
| Storage temperature range | –65°C to +150°C |
74LS245 IC Datasheet
IC 74LS00 74LS00 Quad 2 Input NAND Gate IC (7400 IC) DIP-14 Package
The 74LS00 is a 14 Pin Quad 2-Input NAND Gate IC. This device contains four independent gates each of which performs the logic NAND function. NAND gates utilize advanced silicon-gate CMOS technology to achieve operating speeds with the low power consumption of standard CMOS integrated circuits. All gates have buffered outputs.
All devices have high noise immunity and the ability to drive 10 LS-TTL loads. The 74LS logic family is functionally as well as pin-out compatible with the standard 74HC logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
Features:-
- Four Independent NAND Gates
- 14 Pin IC
- Operating Temperature to 70 C
- High-Speed Low Power CMOS Type
Related Document:-
IC 74LS02 74LS02 Quad 2-Input NOR Gate IC (7402 IC) DIP-14 Package
The 74LS02 is a 14 Pin Quad 2-Input NOR Gate IC. NOR gates utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to HC gates with the low power consumption of standard CMOS integrated circuits. All gates have buffered outputs, providing high noise immunity and the ability to drive 10 LS-TTL loads. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family.
All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
Features:-
- Four Independent NOR Gates
- 14 Pin IC
- Operating Temperature to 70 Deg C
- High-Speed CMOS Type
Related Document:-
IC 74LS04 74LS04 Hex Inverter IC (7404 IC) DIP-14 Package
74LS04 is Hex Inverter NOT gate IC. It consists of six inverters which perform logical invert action. output of an inverter is complement of its input logic state i.e. when input is high its output is low and vice versa. device contains six independent gates each of which performs logic INVERT function. Operating voltage is 5V, high-level input voltage is 2V, and low-level input is 0.8V. Contains absolute maximum ratings over operating free-air temperature range, recommended operating conditions, electrical characteristics over recommended operating free-air temperature range.
Features:-
- 6 Hex Inverters in a 14-Pin DIP Package
- Outputs Directly Interface to CMOS, NMOS and TTL
- Large Operating Voltage Range
- Wide Operating Conditions
- Type: DIP Bipolar
- Voltage Rating: 4.75 to 5.25V
- Current Rating: Max. 16mA Output
- Temperature Rating: 0 to 70Deg C
- Number of: 14 Pins
- Mounting: Through Hole
IC 74LS08
IC CD40106
IC CD4013 HLF
IC IR2110 IR
Features:-
- Floating channel designed for bootstrap operation Fully operational to +500V or +600V Tolerant to negative transient voltage dV/dt immune
- Gate drive supply range from 10 to 20V
- Undervoltage lockout for both channels
- 3.3V logic compatible Separate logic supply range from 3.3V to 20V Logic and power ground ±5V offset
- CMOS Schmitt-triggered inputs with pull-down
- Cycle by cycle edge-triggered shutdown logic
- Matched propagation delay for both channels
- Outputs in phase with inputs
IC IRFP 4768
- Optimized for broadest availability from distribution partners
- Product qualification according to JEDEC standard
- Industry standard through-hole power package
- High-current rating
Benefits
- Wide availability from distribution partners
- Industry standard qualification level
- Standard pinout allows for drop in replacement
- High power density
IC LM 358
- It consists of two op-amps internally and frequency compensated for unity gain
- The large voltage gain is 100 dB
- Wide bandwidth is 1MHz
- Range of wide power supplies includes single and dual power supplies
- Range of Single power supply is from 3V to 32V
- Range of dual power supplies is from + or -1.5V to + or -16V
- The supply current drain is very low, i.e., 500 μA
- 2mV low i/p offset voltage
- Common mode i/p voltage range comprises ground
- The power supply voltage and differential i/p voltages are similar
- o/p voltage swing is large.
IC LM339 ST
• Single Supply Operation: 3.0 V to 36 V
• Split Supply Operation: ±1.5 V to ±18 V
• Low Input Bias Current: 25 nA (Typ)
• Low Input Offset Current: ±5.0 nA (Typ)
• Low Input Offset Voltage
• Input Common Mode Voltage Range to GND
• Low Output Saturation Voltage: 130 mV (Typ) @ 4.0 mA
• TTL and CMOS Compatible
• ESD Clamps on the Inputs Increase Reliability without Affecting
Device Operation
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
