Resistors
Connectors
Capacitors
Wires and Connectors
Shop
FAN7392 High-Current, High- & Low-Side, Gate-Drive IC
Features:-
- Floating Channel for Bootstrap Operation to +600V
- 3AJ3A Sourcing/Sinking Current Driving Capability
- Common-Mode dv/dt Noise Canceling Circuit
- 3.3V Logic Compatible Separate Logic Supply (VDD) Range from 3.3V to 20V
- Under-Voltage Lockout for vcc and VBS Cycle-by-Cycle Edge-Triggered Shutdown Logic
- Matched Propagation Delay for Both Channels
- Outputs In-phase with Input Signal
Flame Sensor infrared Receiver Ignition source detection module
-
Features :
- Indicator light: a green one for the switch, a red one for power.
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Can detect fire or wavelength in 760 ~ 1100 nm nano within the scope of the light source.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
FUSE HOLDERS FH1
FUSE HOLDERS FH5
FUSE HOLDERS FH6
FUSE HOLDERS FH7
FUSE HOLDERS PBF4
Brand:
VITAL
Moulded Material:
Polyamide (Nylon) 66 - UL94 V0 or V2 - Glass Filled
Nominal Rating:
6.30A/250V
Mounting Style:
PCB Type
Insulation Resistance:
1000 M-ohm @ 500 Vdc"}" data-sheets-numberformat="[null,2,"@",1]">> 1000 M-ohm @ 500 Vdc
Permissible Soldering Temp:
270 C for 5 sec max
Permissible Operating Temp:
-20 C to +85 C
Contact Resistance:
10 m ohm max
Approx Weight:
2.5 gms
Terminal:
Tin plated copper alloy
Fuse Link:
5 X 20 mm
Product Specification
| Fuse Type | Panel Mount |
| Current Rating | 6.3A |
| Brand | Elcom |
| Voltage | 250V AC |
| Mounting Style | Panel Mount |
| Contact Resistance | 10 m Ohms max |
| Fuse Link Size | 5x20 mm |
| HV Breakdown Test | 2KV AC For 1 Minute |
| Panel Thickness | 5.0 mm |
| Rated Current | 6.3 Amps |
GLUN 11 mm Transparent HOT MELT 14 Glue Sticks for DIY and Craft Work
HLF DIP Cd4001be Integrated Circuit, For Power
IC 24C04 ATMEL Atmel 24C16A/24C16 8 Pin Dil/Dip 16K Serial Eeprom
|
MICROCHIP (ATMEL) |
||
|
EEPROM memory |
||
|
EEPROM |
||
|
SPI |
||
|
128x8bit |
||
|
20MHz |
||
|
SMD |
||
|
SO8 |
||
|
1kb |
||
|
series |
||
|
-40...125°C |
||
|
1M |
||
|
5ms |
||
|
1.8...5.5V |
- Gross weight: 0.072g
- Manufacturer part number: AT25010B-SSHL-B
Items sensitive to electrostatic charges are packed while maintaining safety measures in a special ESD area. Elements are packaged on anti-static roller tracks or blister-packed with a static-dissipating sponge. All products in the special ESD area are also packed in shielding bags.
IC 4N33 4N35 IC – Optocoupler Phototransistor IC
The 4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. The couplers are Underwriters Laboratories (UL) listed to comply with a 5300 VRMS isolation test voltage.
This isolation performance is accomplished through double molding isolation manufacturing process. Comliance to DIN EN 60747-5-2(VDE0884)/ DIN EN 60747-5-5 pending partial discharge isolation specification is available for these families by ordering option 1.
These isolation processes and the ISO9001 quality program results in the highest isolation performance available for a commecial plastic phototransistor optocoupler. The devices are available in lead formed configuration suitable for surface mounting and are available either on tape and reel, or in standard tube shipping containers.
Features:-
• Isolation Test Voltage 5300 VRMS
• Interfaces with common logic families
• Input-output coupling capacitance < 0.5 pF
• Industry Standard Dual-in line 6-pin package
Agency Approvals:-
• Underwriters Laboratory File #E52744
• DIN EN 60747-5-2(VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
Applications:-
• AC mains detection
• Reed relay driving
• Switch mode power supply feedback
• Telephone ring detection
• Logic ground isolation
• Logic coupling with high frequency noise rejection
Specification:-
Related Document:-
4N35 IC Data Sheet
| Symbol | Parameter | Value | Unit |
| VR | Reverse voltage | 6 | V |
| IF | Forward current | 60 | mA |
| IFSM | Surge current | 2.5 | A |
| Pdiss | Power dissipation | 100 | mW |
| VCEO | Collector-emitter breakdown voltage | 70 | V |
| VEBO | Emitter-base breakdown voltage | 7 | V |
| IC | Collector current | 100 | mA |
4N35 IC Data Sheet
IC 4N35 OPTO 4N35 IC – Optocoupler Phototransistor IC
The 4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. The couplers are Underwriters Laboratories (UL) listed to comply with a 5300 VRMS isolation test voltage.
This isolation performance is accomplished through double molding isolation manufacturing process. Comliance to DIN EN 60747-5-2(VDE0884)/ DIN EN 60747-5-5 pending partial discharge isolation specification is available for these families by ordering option 1.
These isolation processes and the ISO9001 quality program results in the highest isolation performance available for a commecial plastic phototransistor optocoupler. The devices are available in lead formed configuration suitable for surface mounting and are available either on tape and reel, or in standard tube shipping containers.
Features:-
• Isolation Test Voltage 5300 VRMS
• Interfaces with common logic families
• Input-output coupling capacitance < 0.5 pF
• Industry Standard Dual-in line 6-pin package
Agency Approvals:-
• Underwriters Laboratory File #E52744
• DIN EN 60747-5-2(VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
Applications:-
• AC mains detection
• Reed relay driving
• Switch mode power supply feedback
• Telephone ring detection
• Logic ground isolation
• Logic coupling with high frequency noise rejection
Specification:-
Related Document:-
4N35 IC Data Sheet
| Symbol | Parameter | Value | Unit |
| VR | Reverse voltage | 6 | V |
| IF | Forward current | 60 | mA |
| IFSM | Surge current | 2.5 | A |
| Pdiss | Power dissipation | 100 | mW |
| VCEO | Collector-emitter breakdown voltage | 70 | V |
| VEBO | Emitter-base breakdown voltage | 7 | V |
| IC | Collector current | 100 | mA |
IC 5LO380R Integrato – KA5L0380R – KA5L0380R sl
Part Number : 5L0380R
Function : Fairchild Power Switch(FPS)
Package : TO-220F-4L Type
Manufacturers : Fairchild Semiconductor
Image
Description
The Fairchild Power Switch(FPS) product family is specially designed for an off-line SMPS with minimal external components. The Fairchild Power Switch(FPS) consists of a high voltage power SenseFET and a current mode PWM IC.
Included PWM controller integrates the fixed frequency oscillator, the under voltage lock-out, the leading edge blanking, the optimized gate turn-on/turn-off driver, the thermal shutdown protection, the over voltage protection, and the temperature compensated precision current sources for the loop compensation and the fault protection circuitry.
Compared to a discrete MOSFET and a PWM controller or an RCCsolution, a Fairchild Power Switch(FPS) can reduce the total component count, design size and weight and at the same time increase efficiency, productivity, and system reliability. It has a basic platform well suited for the cost effective design in either a flyback converter or a forward converter
Block Diagram
Applications
1. SMPS for VCR, SVR, STB, DVD & DVCD
2. SMPS for Printer, Facsimile & Scanner
3. Adaptor for Camcorder
Other data sheets within the file : 5H0380R, 5L0380R, 5LO380R, 5MO380R, KA5H0380R
Description
The Fairchild Power Switch(FPS) product family is specially designed for an off-line SMPS with minimal external components. The Fairchild Power Switch(FPS) consists of a high voltage power SenseFET and a current mode PWM IC.
Included PWM controller integrates the fixed frequency oscillator, the under voltage lock-out, the leading edge blanking, the optimized gate turn-on/turn-off driver, the thermal shutdown protection, the over voltage protection, and the temperature compensated precision current sources for the loop compensation and the fault protection circuitry.
Compared to a discrete MOSFET and a PWM controller or an RCCsolution, a Fairchild Power Switch(FPS) can reduce the total component count, design size and weight and at the same time increase efficiency, productivity, and system reliability. It has a basic platform well suited for the cost effective design in either a flyback converter or a forward converter
Block Diagram
Applications
1. SMPS for VCR, SVR, STB, DVD & DVCD
2. SMPS for Printer, Facsimile & Scanner
3. Adaptor for Camcorder
Other data sheets within the file : 5H0380R, 5L0380R, 5LO380R, 5MO380R, KA5H0380R
5L0380R Datasheet PDF
