Resistors
Connectors
Capacitors
Wires and Connectors
-12%New
IRFB4110 MOSFET- 100V 180A N-Channel HEXFET Power MOSFET TO-220
₹145.00
| Part Number | IRFB4110 |
| Mounting Type | Through Hole |
| Gate Charge Voltage | 10V |
| Number Of Pin | 3 Pins |
| Operating Temperature | -55 -175 Degree Celsius |
| Deals in | New |
High efficiency synchronous rectification in SMPS
• Uninterruptible power supply
• High speed power switching
• Hard switched and high frequency circuits
Additional information
| Specification | Blue, Brown, Yellow |
|---|
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
Submit an order before the cut-off time to shorten your delivery time
When selecting the delivery method, orders of in-stock items will be shipped out either the same day or next business day depending on the cut-off time listed below. Items being transferred from other global warehouses may require additional time for delivery.
- Same-day dispatch cut-off time is: 10:30pm
- In stock items ordered before this time will ship out the same day the order is placed.
- Orders received on Saturday or Sunday will be shipped the next business day.
Backorders
Items on backorder will be despatched when they arrive back in stock. If you place an order that has one or more items on backorder you can choose whether to have all items despatched together or to receive the items currently in stock as soon as possible.
Options for backorders
- Backorder allowed
We'll despatch in-stock items immediately and place any out-of-stock items on backorder. Items on backorder will be despatched as they become available. Therefore, your order may arrive in single or multiple deliveries. - Deliver order complete
If any items in your order are out of stock, we can hold your entire order until all items become available. Your order will then arrive in one delivery.
Delivery fee
Terms & Conditions
- Dimensional weight calculations and volumetric weight calculations may apply. For products above 5kg or for products which are bulky or hazardous, please get in touch with us.
- COD charges are separate for COD shipments.
To discuss shipping options, please contact us at 9846720907 , 9061396217 or send an email to [email protected]
Related products
PIC16F1503
Features:
Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
Flash Program Memory with self read/write capability
128 B of Non-volatile Data Storage
Internal 16MHz oscillator
4x Standalone PWM
Complementary Waveform Generator (CWG) Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
Flash Program Memory with self read/write capability
High Endurance Flash Memory (HEF)
128 B of Non-volatile Data Storage
Internal 16MHz oscillator
4x Standalone PWM
Complementary Waveform Generator (CWG)
Numerically Controlled Oscillator (NCO)
2x Configurable Logic Cell (CLC)
Integrated Temperature Indicator
8 Channel 10-bit ADC with Voltage Reference
5-bit Digital to Analog Converter (DAC)
MI2C, SPI
25mA Source/Sink current I/O
2x 8-bit Timers (TMR0/TMR2)
1x 16-bit Timer (TMR1)
Extended Watchdog Timer (WDT)
Enhanced Power-On/Off-Reset
Low-Power Brown-Out Reset (LPBOR)
Programmable Brown-Out Reset (BOR)
In Circuit Serial Programming (ICSP)
In-Circuit Debug using a Debug Header
Wide Operation Voltage Variant ‘F’ (2.3V – 5.5V)
eXtreme Low Power (XLP) ‘LF’ Variant (1.8V – 3.6V)
IC IR2110 IR
Features:-
- Floating channel designed for bootstrap operation Fully operational to +500V or +600V Tolerant to negative transient voltage dV/dt immune
- Gate drive supply range from 10 to 20V
- Undervoltage lockout for both channels
- 3.3V logic compatible Separate logic supply range from 3.3V to 20V Logic and power ground ±5V offset
- CMOS Schmitt-triggered inputs with pull-down
- Cycle by cycle edge-triggered shutdown logic
- Matched propagation delay for both channels
- Outputs in phase with inputs
IC 74HC164 ST 74HC164 8-Bit Serial In/Parallel out Shift Register IC (74164 IC) DIP-14 Package
74HC164 utilizes advanced silicon-gate CMOS technology. It has the high noise immunity and low consumption of standard CMOS integrated circuits. It also offers speeds comparable to low power Schottky devices. This 8-bit shift register has gated serial inputs and CLEAR.
Each register bit is a D-type master/slave flip-flop. Inputs A & B permit complete control over the incoming data. A LOW at either or both inputs inhibits entry of new data and resets the first flip-flop to the low level at the next clock pulse. A high level on one input enables the other input which will then determine the state of the first flip-flop.
Data at the serial inputs may be changed while the clock is HIGH or LOW, but only information meeting the setup and hold time requirements will be entered. Data is serially shifted in and out of the 8-bit register during the positive going transition of the clock pulse. Clear is independent of the clock and accomplished by a low level at the CLEAR input. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
Features:-
Related Document:-
74HC164 IC Datasheet
- Typical operating frequency: 50 MHz
- Typical propagation delay: 19 ns (clock to Q)
- Wide operating supply voltage range: 2V to 6V
- Low input current: 1 µA maximum
- Low quiescent supply current: 80 µA maximum (74HC Series)
- Fanout of 10 LS-TTL loads
| Parameter | Min | Max | Unit |
| Supply Voltage (VCC) | 2 | 6 | V |
| DC Input or Output Voltage (VIN, VOUT) | 0 | Vcc | V |
| Operating Temperature Range (TA) −4 | -40 | 85 | °C |
| Input Rise or Fall Times | |||
| VCC = 2.0V | 1000 | ns | |
| VCC = 4.5V | 500 | ns | |
| VCC = 6.0V | 400 | ns |
74HC164 IC Datasheet
IC 6N137 EL 6N137 – High Speed Optocoupler
The 6N137 is single channel 10 MBd opto-couplers utilizing a high efficient input LED coupled with an integrated optical photodiode IC detector. The detector has an open drain NMOS-transistor output, providing less leakage compared to an open collector Schottky clamped transistor output. For the single channel type, an enable function on pin 7 allows the detector to be strobed. The use of a 0.1 μF bypass capacitor connected between pin 5 and 8 is recommended.
Features of 6N137 High Speed Opto-coupler:-
- Choice of CMR performance of 15 kV/μs, 5 kV/μs, and 1000 V/μs
- High speed: 10 MBd typical
- +5 V CMOS compatibility
- Pure tin leads
- Guaranteed AC and DC performance over temperature: -40 °C to +100 °C temperature range
- Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S) requirements
- Low input current capability of 5 mA
- Microprocessor system interface
- PLC, ATE input/output isolation
- Computer peripheral interface
- Digital fieldbus isolation: CC-link, DeviceNet, profibus, SDS
- High speed A/D and D/A conversion
- AC plasma display panel level shifting
- Multiplexed data transmission
- Digital control power supply
- Ground loop elimination, noise isolation
Reviews
There are no reviews yet.