Resistors
Connectors
Capacitors
Wires and Connectors
Shop
75A 1200V SKM75GB12T4 Modules IGBT Semikron
Manufacturer:SEMIKRON
Manufacturer Part No:SKM75GB12T4
Order Code:2423705
Technical Datasheet: SKM75GB12T4 Datasheet
Product Overview
The SKM75GB12T4 is a SEMITRANS® 2 fast IGBT Module for use with AC inverter drives and UPS. It features insulated copper base plate using DBC technology (Direct Bonded Copper) and increased power cycling capability.
- Half-bridge switch
- IGBT4 = 4th generation medium fast Trench IGBT (Infineon)
- CAL4 = Soft switching 4th generation CAL-diode
- Integrated gate resistor
- For higher switching frequencies up to 12kHz
- UL recognized, file number E63532
Applications
Power Management, Maintenance & Repair
7805 Voltage Regulator IC LM7805 12v to 5v Regulator for Multiple Applications (Pack of 10)
7D/431-275V MOV
- Technical Specification:
- Model : 7D431K
- Mounting Type : Through Hole
- Varistor Voltage : 430V
- Tolerance : ±10%
- Element Diameter : 10mm
- Operating Temperature : -40°C to 105°C
- Maximum Clamping Voltage : 845V @ 25A
- Rated Power : 0.4W
- Capacitance : 400pF
- AC Vrms : 275V
- DC Voltage : 350V
- Features:
- High voltage rating
- High current rating
- Bidirectional
- Surge protection
- Fast response time
Applications:- Power supplies
- Power systems
- Line voltage
- Telecom systems
- White goods / appliances
Applications:
8 Pin DIP IC Socket Base Adaptor (Pack of 10)
Aluminium Electrolytic Capacitor 4700 Mfd/450 Volt
Arduino Nano V3
Description:-Arduino NANO Version 3 is the open source smallest Embedded Development board launched by Arduino based on Atmega328 SMD Package Microcontroller. It is a Surface mount Breadboard Friendly board integrated with Mini USB Port. DC Power Jack is not available on this Board, so power can be given through Mini USB Cable. It automatically sense and switch to the higher potential source of power, there is no need for the power select jumper.Specifications:-
- Microcontroller Atmel ATmega328 SMD Package
- Operating Voltage (logic level) 5 V
- Input Voltage (recommended) 7-12 V
- Input Voltage (limits) 6-20 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 8
- DC Current per I/O Pin 40 mA
- Flash Memory 32 KB (of which 2KB used by bootloader)
- SRAM 2 KB
- EEPROM 1 KB
- Clock Speed 16 MHz
- Dimensions 0.70” x 1.70”
Arduino UNO R3 Development Board
The Arduino Uno R3 is a open source microcontroller board based on the ATmega328 chip. This Board has 14 digital input/output pins, 6 analog input pins, Onboard 16 MHz ceramic resonator, Port for USB connection, Onboard DC power jack, An ICSP header and a microcontroller reset button. It contains everything needed to support the microcontroller. Using the board is also very easy, simply connect it to a computer with a USB cable or power it with DC adapter or battery to get started.
* Product Images are shown for illustrative purposes only and may differ from actual product.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2Atmega8U2 up to version R2) programmed as a USB-to-serial converter. While the Arduino UNO can be powered via the USB connection or with an external power supply, the power source is selected automatically.
External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Also leads from a battery can be inserted in the Gnd and Vin pin headers of the Power connector. The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 5v to 12v for Arduino Uno.
Features:-
- Microcontroller: ATmega328P.
- Operating Voltage: 5V.
- Input Voltage: 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6.
- DC Current: 40mA.
- Flash Memory: 32 KB.
- SRAM: 2 KB.
- EEPROM: 1 KB.
- Clock Speed: 16 MHz.
Applications:-
- DIY project prototyping.
- Developing varied varieties of projects that require a code based control.
- Automation System development.
- Learning AVR programming.
- Entry level circuit designing.
