Showing 25–36 of 290 results

24C08 8 Kbit Serial I2C Bus EEPROM Memory IC

45.99
The Microchip Technology Inc. 24C08 is an 8K or 16K bit Electrically Erasable PROM intended for use in extended/automotive temperature ranges. The device is organized as four or eight blocks of 256 x 8-bit memory with a 2-wire serial interface. The 24C08 also has a page-write capability for up to 16 bytes of data. The 24C08 is available in the standard 8-pin DIP and both 8-lead and 14-lead surface mount SOIC packages.Features:-• Single supply with operation from 4.5-5.5V• Low power CMOS technology - 1 mA active current typical - 10 µA standby current typical at 5.5V• Organized as 4 or 8 blocks of 256 bytes (4 x 256 x 8) or (8 x 256 x 8)• 2-wire serial interface bus, I2C compatible• Schmitt trigger, filtered inputs for noise suppression• Output slope control to eliminate ground bounce• 100 kHz compatibility• Self-timed write cycle (including auto-erase)• Page-write buffer for up to 16 bytes• 2 ms typical write cycle time for page-write• Hardware write protect for entire memory• Can be operated as a serial ROM• ESD protection > 4,000V• 1,000,000 ERASE/WRITE cycles guaranteed• Data retention > 200 years• 8-pin DIP, 8-lead or 14-lead SOIC packages• Available for extended temperature rangeSpecification:-
ParameterSpecification
VCC7.0V
All inputs and outputs w.r.t. VSS-0.6V to VCC +1.0V
Storage temperature-65°C to +150°C
Ambient temperature with power applied-65°C to +125°C
ESD protection on all pins≥ 4 kV
Soldering temperature of leads (10 seconds)300°C
Related Document:-24C08 IC Datasheet
* Product Images are shown for illustrative purposes only and may differ from actual product.

28 Pin DIP IC Socket-Base-Connector for Microcontrollers and IC’s (5 Pieces)

34.99
  1. Features:

    1. 28 pins.
    2. JDEC compliant.
    3. Molded notch for proper orientation.
    4. Easy to insert and remove ICs.

40 Pin DIP IC Socket Base Adaptor (Pack of 5)

45.99
  1. Features:

    1. 40 pins.
    2. JDEC compliant.
    3. Molded notch for proper orientation.
    4. Easy to insert and remove ICs.

40AMP CURRENT TRANSFORMER, 1:1200, Pcb Mount -(with Casing) (CT 40AMS CT 1200T)

149.00

Product Description

  • Designed and developed as per European Standards IEC : 62053-21 / IS: 13779 , IEC : 60044-1 Part-1.
  • Ideal for Electronic Safety Control Gear design ,
  • Overload Sensing , Furnace Temperature Control ,
  • Motor Speed Control , Instrument Transformer ,
  • Energy Metering ,
  • Power Quality Monitoring.
  • Home Automation Devices
  • Earth Leakage Circuit Braker CT ( ELCB CT )
  • Residual Current Circuit Braker CT ( RCCB CT )
  • Ground Fault Interruptor CT ( GFI CT )
  • Variants available in Self Wire (Flying Leads) or PCB Mounting Type CT.

Product Image

Shah 2 AMP CURRENT TRANSFORMER, 1:550, Pcb Mount -(with Casing)

5AMP CURRENT TRANSFORMER, 1:1200, Pcb Mount -(with Casing) (CT 5A/1200T SHA)

68.00

Product Description

  • Designed and developed as per European Standards IEC : 62053-21 / IS: 13779 , IEC : 60044-1 Part-1.
  • Ideal for Electronic Safety Control Gear design ,
  • Overload Sensing , Furnace Temperature Control ,
  • Motor Speed Control , Instrument Transformer ,
  • Energy Metering ,
  • Power Quality Monitoring.
  • Home Automation Devices
  • Earth Leakage Circuit Braker CT ( ELCB CT )
  • Residual Current Circuit Braker CT ( RCCB CT )
  • Ground Fault Interruptor CT ( GFI CT )
  • Variants available in Self Wire (Flying Leads) or PCB Mounting Type CT.

Product Image

Shah 2 AMP CURRENT TRANSFORMER, 1:550, Pcb Mount -(with Casing)

6 Pin DIP IC Socket Base Adaptor (Pack of 10)

29.99
    1. 6 pins.
    2. JDEC compliant.
    3. Molded notch for proper orientation.
    4. Easy to insert and remove ICs.

63D-12-1CE RELAY 12V 30A OEN

99.99
Arduino Uno Rev3 Code: A000066 / Barcode: 7630049200050 Nunc per mollis pot enti amet imperdiet blandit dis eu sociosqu accumsan