Shop

-17%

Close

P80nf10 Mosfet transistor

IC's

Type Designator: STP80NF10
Marking Code: P80NF10
Type of Transistor: MOSFET
Type of Control Channel: N -Channel
Maximum Power Dissipation (Pd): 300 W
Maximum Drain-Source Voltage |Vds|: 100 V
Maximum Gate-Source Voltage |Vgs|: 20 V
Maximum Gate-Threshold Voltage |Vgs(th)|: 4 V
Maximum Drain Current |Id|: 80 A
Maximum Junction Temperature (Tj): 175 °C
Total Gate Charge (Qg): 135 nC
Rise Time (tr): 80 nS
Drain-Source Capacitance (Cd): 700 pF
Maximum Drain-Source On-State Resistance (Rds): 0.015 Ohm

PAC LAN Cable 5 m CAT6 Cable 5 meter Ethernet Lan Network CAT 6 RJ45 Patch Cord Internet (Compatible with internet, Blue)

Passive Components, RESISTORS

General

Brand	PAC
Type	LAN Cable
Cable Type	450 Mbps Speed
Connector 1	USB Type A
Connector 2	rj45
Cable	Round
Part Number	rj
Model	CAT6 Cable 5 meter Ethernet Lan Network CAT 6 RJ45 Patch Cord Internet
Compatible Devices	Computer
Color	Blue
Suitable For	internet
Cable Length	5 m

PC817/EL817 – 4 Pin DIP Phototransistor based Optocoupler

Semiconductors - ICs, IC's

1. . 4pin DIP package 2. Double transfer mold package (Ideal for Flow Soldering) 3. High collector-emitter voltage (VCEO:80V(*)) 4. Current transfer ratio (CTR : MIN. 50% at IF=5 mA, VCE=5V) 5. Several CTR ranks available 6. High isolation voltage between input and output

PIC12F675 Micro controller

Semiconductors - ICs, IC's

High-Performance RISC CPU:
- Only 35 Instructions to Learn
  - All single-cycle instructions except branches
- Operating Speed:
  - DC – 20 MHz oscillator/clock input
  - DC – 200 ns instruction cycle
- 8-Level Deep Hardware Stack
- Interrupt Capability
- Direct, Indirect, and Relative Addressing modes
Peripheral Features:
- 6 I/O Pins with Individual Direction Control
- High Current Sink/Source for Direct LED Drive
- Analog Comparator module with:
  - One analog comparator
  - Programmable on-chip comparator voltage reference (CVREF) module
  - Programmable input multiplexing from device inputs
  - Comparator output is externally accessible
- Analog-to-Digital Converter module (PIC12F675):
  - 10-bit resolution
  - Programmable 4-channel input
  - Voltage reference input
- Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler
- Enhanced Timer1:
  - 16-bit timer/counter with prescaler
  - External Gate Input mode
  - Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator, if INTOSC mode selected
- In-Circuit Serial ProgrammingTM (ICSPTM) via two pins

Features:Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels Flash Program Memory with self read/write capability 128 B of Non-volatile Data Storage Internal 16MHz oscillator 4x Standalone PWMComplementary Waveform Generator (CWG) Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels Flash Program Memory with self read/write capability High Endurance Flash Memory (HEF) 128 B of Non-volatile Data Storage Internal 16MHz oscillator 4x Standalone PWM Complementary Waveform Generator (CWG) Numerically Controlled Oscillator (NCO) 2x Configurable Logic Cell (CLC) Integrated Temperature Indicator 8 Channel 10-bit ADC with Voltage Reference 5-bit Digital to Analog Converter (DAC) MI2C, SPI 25mA Source/Sink current I/O 2x 8-bit Timers (TMR0/TMR2) 1x 16-bit Timer (TMR1) Extended Watchdog Timer (WDT) Enhanced Power-On/Off-Reset Low-Power Brown-Out Reset (LPBOR) Programmable Brown-Out Reset (BOR) In Circuit Serial Programming (ICSP) In-Circuit Debug using a Debug Header Wide Operation Voltage Variant ‘F’ (2.3V – 5.5V) eXtreme Low Power (XLP) ‘LF’ Variant (1.8V – 3.6V)

PIC16F676-I/P 8-bit PIC Microcontroller – 14Pin DIP – Microchip

Semiconductors - ICs, IC's

- 128 bytes of EEPROM Data Memory
- programmable pull-up resistors
- individually selectable analog channels
- ICD2 programming support or debugging support with optional header adapter
- 8 oscillator sellections including precision 4 MHz RC oscillator with programmable calibration and Power-on Reset

Pidilite Steelgrip Self Adhesive PVC electrical Insulation Tape – Pack of 5 Assorted Rolls (6.50m Each)

Plastic Strip 4 Inch, (100mm × 2.5mm) Self Locking Nylon Cable Zip Ties – White (100 PCS)

Connectors, Cable, Wire & Cable Assemblies

Plastic Tall Tubular TT/LT Single Battery Inverter Trolly ( Light Grey)

MECHANICAL & HARDWARE

This white tall tubular /tt trolley is used for storing single tt battery, commonly called single tt battery trolley. It can accommodate tt battery it is spacious, safe and made from tough long-lasting material which does not get destroyed by spillage from battery, if any. It is used for reducing storage space and preventing exposing battery to open air. Battery can be kept inside the trolley and inverter or ups can be placed on the top. Its highly durable and sturdy plastic design makes safe from humidity and other environmental issues. It has 5 wheels for easy mobility.

Polycab Solar Cable – Red or Black – 4 SQ MM

Connectors, Cable, Wire & Cable Assemblies

Note: For purchasing 12 Meter length, select Qty as 12. We will ship you single length of 12 Meters.NOTE: MENTION COLOR Solar Wires & Cables are specially designed for connecting PV Modules for complete solar system installation.Cables are UV protected with the lowest conductor resistance and high mechanical strength for varying weather conditions. Electrolytic grade 99.99% pure copper. Oxygen index more than 30%. TUV certified. Electrolytic multi-strand annealed copper conductor. XLPO compound for insulation. EBXL weather UV Protected compound for sheathing. UV protected cables are must for solar installations as the regular wires go brittle in a year to exposed to the sunlight. UV protected wires last for decades in the sun.