Resistors
Connectors
Capacitors
Wires and Connectors
-35%New
IC 74HC164 ST 74HC164 8-Bit Serial In/Parallel out Shift Register IC (74164 IC) DIP-14 Package
₹19.50
74HC164 utilizes advanced silicon-gate CMOS technology. It has the high noise immunity and low consumption of standard CMOS integrated circuits. It also offers speeds comparable to low power Schottky devices. This 8-bit shift register has gated serial inputs and CLEAR.
Each register bit is a D-type master/slave flip-flop. Inputs A & B permit complete control over the incoming data. A LOW at either or both inputs inhibits entry of new data and resets the first flip-flop to the low level at the next clock pulse. A high level on one input enables the other input which will then determine the state of the first flip-flop.
Data at the serial inputs may be changed while the clock is HIGH or LOW, but only information meeting the setup and hold time requirements will be entered. Data is serially shifted in and out of the 8-bit register during the positive going transition of the clock pulse. Clear is independent of the clock and accomplished by a low level at the CLEAR input. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
Features:-
- Typical operating frequency: 50 MHz
- Typical propagation delay: 19 ns (clock to Q)
- Wide operating supply voltage range: 2V to 6V
- Low input current: 1 µA maximum
- Low quiescent supply current: 80 µA maximum (74HC Series)
- Fanout of 10 LS-TTL loads
Specifications:-
| Parameter | Min | Max | Unit |
| Supply Voltage (VCC) | 2 | 6 | V |
| DC Input or Output Voltage (VIN, VOUT) | 0 | Vcc | V |
| Operating Temperature Range (TA) −4 | -40 | 85 | °C |
| Input Rise or Fall Times | |||
| VCC = 2.0V | 1000 | ns | |
| VCC = 4.5V | 500 | ns | |
| VCC = 6.0V | 400 | ns |
Related Document:-
Additional information
| Specification | Blue, Brown, Yellow |
|---|
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
Submit an order before the cut-off time to shorten your delivery time
When selecting the delivery method, orders of in-stock items will be shipped out either the same day or next business day depending on the cut-off time listed below. Items being transferred from other global warehouses may require additional time for delivery.
- Same-day dispatch cut-off time is: 10:30pm
- In stock items ordered before this time will ship out the same day the order is placed.
- Orders received on Saturday or Sunday will be shipped the next business day.
Backorders
Items on backorder will be despatched when they arrive back in stock. If you place an order that has one or more items on backorder you can choose whether to have all items despatched together or to receive the items currently in stock as soon as possible.
Options for backorders
- Backorder allowed
We'll despatch in-stock items immediately and place any out-of-stock items on backorder. Items on backorder will be despatched as they become available. Therefore, your order may arrive in single or multiple deliveries. - Deliver order complete
If any items in your order are out of stock, we can hold your entire order until all items become available. Your order will then arrive in one delivery.
Delivery fee
Terms & Conditions
- Dimensional weight calculations and volumetric weight calculations may apply. For products above 5kg or for products which are bulky or hazardous, please get in touch with us.
- COD charges are separate for COD shipments.
To discuss shipping options, please contact us at 9846720907 , 9061396217 or send an email to [email protected]
Related products
IC PIC16F883 MC
Features of PIC16F886 Microcontroller :-
- Power-Saving Sleep mode
- Power-on Reset (POR)
- Selectable Brown-out Reset (BOR) voltage
- Extended Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
- In-Circuit Serial Programming™ (ICSP™) via two pins
- In-Circuit Debug (ICD) via two pins
- High-endurance Flash/EEPROM cell:
- 100,000 erase/write cycle enhanced Flash program memory, typical
- 1,000,000 erase/write cycle data EEPROM memory, typical
- Data EEPROM retention > 40 years
- Self-reprogrammable under software control
- Programmable code protection
- 1 input only pin
- 25 I/O
- High sink/source current 25 mA
- Interrupt-on-pin change option
- TMR0: 8-bit timer/counter with 8-bit prescaler
- TMR1 enhanced: 16-bit timer/counter with prescaler, External Gate Input mode and dedicated low-power 32 kHz oscillator
- TMR2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler
- Capture/Compare/PWM (CCP) module
- Enhanced Capture/Compare/PWM (ECCP) module with auto-shutdown and PWM steering
- Master Synchronous Serial Port (MSSP) module SPI™ mode, I2C™ mode with address mask capability
- Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) module:
- Supports RS-485, RS-232 and LIN compatibility
- Auto-Baud Detect
- Auto-wake-up on Start bit
- Ultra Low-Power Wake-up (ULPWU)
- 10-bit 11 channel Analog-to-Digital (A/D) Converter
- 2 Analog Comparator modules with:
- Programmable on-chip Voltage Reference (CVREF) module (% of VDD)
- Fixed 0.6 Vref
- Comparator inputs and outputs externally accessible
- SR Latch mode
IC 74LS02 74LS02 Quad 2-Input NOR Gate IC (7402 IC) DIP-14 Package
The 74LS02 is a 14 Pin Quad 2-Input NOR Gate IC. NOR gates utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to HC gates with the low power consumption of standard CMOS integrated circuits. All gates have buffered outputs, providing high noise immunity and the ability to drive 10 LS-TTL loads. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family.
All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
Features:-
- Four Independent NOR Gates
- 14 Pin IC
- Operating Temperature to 70 Deg C
- High-Speed CMOS Type
Related Document:-
IC 74LS00 74LS00 Quad 2 Input NAND Gate IC (7400 IC) DIP-14 Package
The 74LS00 is a 14 Pin Quad 2-Input NAND Gate IC. This device contains four independent gates each of which performs the logic NAND function. NAND gates utilize advanced silicon-gate CMOS technology to achieve operating speeds with the low power consumption of standard CMOS integrated circuits. All gates have buffered outputs.
All devices have high noise immunity and the ability to drive 10 LS-TTL loads. The 74LS logic family is functionally as well as pin-out compatible with the standard 74HC logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
Features:-
- Four Independent NAND Gates
- 14 Pin IC
- Operating Temperature to 70 C
- High-Speed Low Power CMOS Type
Related Document:-
CD4017 CD4017BE 4017 Decade Counter Divider IC Pack of 5PCS
- CD4017 Decad Counter IC With 16 Pin IC Base Free The CD4017B is a 5-stage Johnson counter with 10 decoded outputs. Inputs include a CLOCK, a RESET, and a CLOCK INHIBIT signal. Schmitt trigger action in the CLOCK input circuit provides pulse shaping that allows unlimited clock input pulse rise and fall times.
- Decade counter IC - 4017
- Branded New IC'S -5PCS
PIC16F1503
Features:
Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
Flash Program Memory with self read/write capability
128 B of Non-volatile Data Storage
Internal 16MHz oscillator
4x Standalone PWM
Complementary Waveform Generator (CWG) Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
Flash Program Memory with self read/write capability
High Endurance Flash Memory (HEF)
128 B of Non-volatile Data Storage
Internal 16MHz oscillator
4x Standalone PWM
Complementary Waveform Generator (CWG)
Numerically Controlled Oscillator (NCO)
2x Configurable Logic Cell (CLC)
Integrated Temperature Indicator
8 Channel 10-bit ADC with Voltage Reference
5-bit Digital to Analog Converter (DAC)
MI2C, SPI
25mA Source/Sink current I/O
2x 8-bit Timers (TMR0/TMR2)
1x 16-bit Timer (TMR1)
Extended Watchdog Timer (WDT)
Enhanced Power-On/Off-Reset
Low-Power Brown-Out Reset (LPBOR)
Programmable Brown-Out Reset (BOR)
In Circuit Serial Programming (ICSP)
In-Circuit Debug using a Debug Header
Wide Operation Voltage Variant ‘F’ (2.3V – 5.5V)
eXtreme Low Power (XLP) ‘LF’ Variant (1.8V – 3.6V)
Reviews
There are no reviews yet.