Resistors
Connectors
Capacitors
Wires and Connectors
-19%New
IC PIC16F883 MC
₹110.00
Features of PIC16F886 Microcontroller :-
- Power-Saving Sleep mode
- Power-on Reset (POR)
- Selectable Brown-out Reset (BOR) voltage
- Extended Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
- In-Circuit Serial Programming™ (ICSP™) via two pins
- In-Circuit Debug (ICD) via two pins
- High-endurance Flash/EEPROM cell:
- 100,000 erase/write cycle enhanced Flash program memory, typical
- 1,000,000 erase/write cycle data EEPROM memory, typical
- Data EEPROM retention > 40 years
- Self-reprogrammable under software control
- Programmable code protection
Peripheral Features of PIC16F886 Microcontroller:-
- 1 input only pin
- 25 I/O
- High sink/source current 25 mA
- Interrupt-on-pin change option
Timers:-
- TMR0: 8-bit timer/counter with 8-bit prescaler
- TMR1 enhanced: 16-bit timer/counter with prescaler, External Gate Input mode and dedicated low-power 32 kHz oscillator
- TMR2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler
- Capture/Compare/PWM (CCP) module
- Enhanced Capture/Compare/PWM (ECCP) module with auto-shutdown and PWM steering
- Master Synchronous Serial Port (MSSP) module SPI™ mode, I2C™ mode with address mask capability
- Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) module:
- Supports RS-485, RS-232 and LIN compatibility
- Auto-Baud Detect
- Auto-wake-up on Start bit
- Ultra Low-Power Wake-up (ULPWU)
Analog Features of PIC16F886 Microcontroller:-
- 10-bit 11 channel Analog-to-Digital (A/D) Converter
- 2 Analog Comparator modules with:
- Programmable on-chip Voltage Reference (CVREF) module (% of VDD)
- Fixed 0.6 Vref
- Comparator inputs and outputs externally accessible
- SR Latch mode
Additional information
| Specification | Blue, Brown, Yellow |
|---|
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
Submit an order before the cut-off time to shorten your delivery time
When selecting the delivery method, orders of in-stock items will be shipped out either the same day or next business day depending on the cut-off time listed below. Items being transferred from other global warehouses may require additional time for delivery.
- Same-day dispatch cut-off time is: 10:30pm
- In stock items ordered before this time will ship out the same day the order is placed.
- Orders received on Saturday or Sunday will be shipped the next business day.
Backorders
Items on backorder will be despatched when they arrive back in stock. If you place an order that has one or more items on backorder you can choose whether to have all items despatched together or to receive the items currently in stock as soon as possible.
Options for backorders
- Backorder allowed
We'll despatch in-stock items immediately and place any out-of-stock items on backorder. Items on backorder will be despatched as they become available. Therefore, your order may arrive in single or multiple deliveries. - Deliver order complete
If any items in your order are out of stock, we can hold your entire order until all items become available. Your order will then arrive in one delivery.
Delivery fee
Terms & Conditions
- Dimensional weight calculations and volumetric weight calculations may apply. For products above 5kg or for products which are bulky or hazardous, please get in touch with us.
- COD charges are separate for COD shipments.
To discuss shipping options, please contact us at 9846720907 , 9061396217 or send an email to [email protected]
Related products
IC 74LS04 74LS04 Hex Inverter IC (7404 IC) DIP-14 Package
74LS04 is Hex Inverter NOT gate IC. It consists of six inverters which perform logical invert action. output of an inverter is complement of its input logic state i.e. when input is high its output is low and vice versa. device contains six independent gates each of which performs logic INVERT function. Operating voltage is 5V, high-level input voltage is 2V, and low-level input is 0.8V. Contains absolute maximum ratings over operating free-air temperature range, recommended operating conditions, electrical characteristics over recommended operating free-air temperature range.
Features:-
- 6 Hex Inverters in a 14-Pin DIP Package
- Outputs Directly Interface to CMOS, NMOS and TTL
- Large Operating Voltage Range
- Wide Operating Conditions
- Type: DIP Bipolar
- Voltage Rating: 4.75 to 5.25V
- Current Rating: Max. 16mA Output
- Temperature Rating: 0 to 70Deg C
- Number of: 14 Pins
- Mounting: Through Hole
IC 74HC164 ST 74HC164 8-Bit Serial In/Parallel out Shift Register IC (74164 IC) DIP-14 Package
74HC164 utilizes advanced silicon-gate CMOS technology. It has the high noise immunity and low consumption of standard CMOS integrated circuits. It also offers speeds comparable to low power Schottky devices. This 8-bit shift register has gated serial inputs and CLEAR.
Each register bit is a D-type master/slave flip-flop. Inputs A & B permit complete control over the incoming data. A LOW at either or both inputs inhibits entry of new data and resets the first flip-flop to the low level at the next clock pulse. A high level on one input enables the other input which will then determine the state of the first flip-flop.
Data at the serial inputs may be changed while the clock is HIGH or LOW, but only information meeting the setup and hold time requirements will be entered. Data is serially shifted in and out of the 8-bit register during the positive going transition of the clock pulse. Clear is independent of the clock and accomplished by a low level at the CLEAR input. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
Features:-
Related Document:-
74HC164 IC Datasheet
- Typical operating frequency: 50 MHz
- Typical propagation delay: 19 ns (clock to Q)
- Wide operating supply voltage range: 2V to 6V
- Low input current: 1 µA maximum
- Low quiescent supply current: 80 µA maximum (74HC Series)
- Fanout of 10 LS-TTL loads
| Parameter | Min | Max | Unit |
| Supply Voltage (VCC) | 2 | 6 | V |
| DC Input or Output Voltage (VIN, VOUT) | 0 | Vcc | V |
| Operating Temperature Range (TA) −4 | -40 | 85 | °C |
| Input Rise or Fall Times | |||
| VCC = 2.0V | 1000 | ns | |
| VCC = 4.5V | 500 | ns | |
| VCC = 6.0V | 400 | ns |
74HC164 IC Datasheet
IC 74HC139 74LS139 Dual 2-to-4 line Decoder/Demultiplexer IC (74139 IC) DIP-16 Package
The 74LS139 comprises two separate two-line-to-four line decoders in a single package. The active-low enable input can be used as a data line in demultiplexing applications. All of these decoders/demultiplexers feature fully buffered inputs, presenting only one normalized load to its driving circuit. All inputs are clamped with high-performance Schottky diodes to suppress line-ringing and simplify system design.
These Schottky-clamped circuits are designed to be used in high-performance memory-decoding or data-routing applications, requiring very short propagation delay times. In high-performance memory systems these decoders can be used to minimize the effects of system decoding. When used with high-speed memories, the delay times of these decoders are usually less than the typical access time of the memory. This means that the effective system delay introduced by the decoder is negligible.
Features:-
• Designed specifically for high speed: Memory decoders Data transmission systems
• 74LS139 contains two fully independent 2-to-4-line decoders/demultiplexers
• Schottky clamped for high performance
• Typical propagation delay (3 levels of logic) is 21 ns
• Typical power dissipation is 34 mW
Specifications:-
Related Document:-
74LS139 IC Datasheet
| Parameter | Specification |
| Supply Voltage (VCC) | 7 V |
| Input Voltage (VI) | 7 V |
| Operating free-air temperature range | 0°C to +70°C |
| Storage temperature range | –65°C to +150°C |
74LS139 IC Datasheet
IGBT 100A1200V SKM100GB12T4 SKM100GB12T4 IGBT Modules SEMITRANS 2
IC 6N137 EL 6N137 – High Speed Optocoupler
The 6N137 is single channel 10 MBd opto-couplers utilizing a high efficient input LED coupled with an integrated optical photodiode IC detector. The detector has an open drain NMOS-transistor output, providing less leakage compared to an open collector Schottky clamped transistor output. For the single channel type, an enable function on pin 7 allows the detector to be strobed. The use of a 0.1 μF bypass capacitor connected between pin 5 and 8 is recommended.
Features of 6N137 High Speed Opto-coupler:-
- Choice of CMR performance of 15 kV/μs, 5 kV/μs, and 1000 V/μs
- High speed: 10 MBd typical
- +5 V CMOS compatibility
- Pure tin leads
- Guaranteed AC and DC performance over temperature: -40 °C to +100 °C temperature range
- Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S) requirements
- Low input current capability of 5 mA
- Microprocessor system interface
- PLC, ATE input/output isolation
- Computer peripheral interface
- Digital fieldbus isolation: CC-link, DeviceNet, profibus, SDS
- High speed A/D and D/A conversion
- AC plasma display panel level shifting
- Multiplexed data transmission
- Digital control power supply
- Ground loop elimination, noise isolation
Reviews
There are no reviews yet.