Resistors
Connectors
Capacitors
Wires and Connectors
-6%New
Previous product
Back to products
SMF 12V 4.5 Ah Battery Amtek
Original price was: ₹950.00.₹899.00Current price is: ₹899.00.
Next product
DSP Technology SineWave home UPS board 850 VA 12 V fully calibrated with display
Original price was: ₹2,800.00.₹2,299.00Current price is: ₹2,299.00.
PWM Solar Charge Controler Board 40 Amp
Original price was: ₹850.00.₹799.00Current price is: ₹799.00.
Additional information
| Specification | Blue, Brown, Yellow |
|---|
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
Submit an order before the cut-off time to shorten your delivery time
When selecting the delivery method, orders of in-stock items will be shipped out either the same day or next business day depending on the cut-off time listed below. Items being transferred from other global warehouses may require additional time for delivery.
- Same-day dispatch cut-off time is: 10:30pm
- In stock items ordered before this time will ship out the same day the order is placed.
- Orders received on Saturday or Sunday will be shipped the next business day.
Backorders
Items on backorder will be despatched when they arrive back in stock. If you place an order that has one or more items on backorder you can choose whether to have all items despatched together or to receive the items currently in stock as soon as possible.
Options for backorders
- Backorder allowed
We'll despatch in-stock items immediately and place any out-of-stock items on backorder. Items on backorder will be despatched as they become available. Therefore, your order may arrive in single or multiple deliveries. - Deliver order complete
If any items in your order are out of stock, we can hold your entire order until all items become available. Your order will then arrive in one delivery.
Delivery fee
Terms & Conditions
- Dimensional weight calculations and volumetric weight calculations may apply. For products above 5kg or for products which are bulky or hazardous, please get in touch with us.
- COD charges are separate for COD shipments.
To discuss shipping options, please contact us at 9846720907 , 9061396217 or send an email to [email protected]
Related products
Arduino UNO R3 Development Board
The Arduino Uno R3 is a open source microcontroller board based on the ATmega328 chip. This Board has 14 digital input/output pins, 6 analog input pins, Onboard 16 MHz ceramic resonator, Port for USB connection, Onboard DC power jack, An ICSP header and a microcontroller reset button. It contains everything needed to support the microcontroller. Using the board is also very easy, simply connect it to a computer with a USB cable or power it with DC adapter or battery to get started.
* Product Images are shown for illustrative purposes only and may differ from actual product.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2Atmega8U2 up to version R2) programmed as a USB-to-serial converter. While the Arduino UNO can be powered via the USB connection or with an external power supply, the power source is selected automatically.
External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Also leads from a battery can be inserted in the Gnd and Vin pin headers of the Power connector. The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 5v to 12v for Arduino Uno.
Features:-
- Microcontroller: ATmega328P.
- Operating Voltage: 5V.
- Input Voltage: 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6.
- DC Current: 40mA.
- Flash Memory: 32 KB.
- SRAM: 2 KB.
- EEPROM: 1 KB.
- Clock Speed: 16 MHz.
Applications:-
- DIY project prototyping.
- Developing varied varieties of projects that require a code based control.
- Automation System development.
- Learning AVR programming.
- Entry level circuit designing.
1 Channel 5V Relay Module without Optocoupler
- Specification and Features :-
- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches;
NEO-6M GPS Module
- Features NEO-6M GPS Module:-
- 5Hz position update rate
- Operating temperature range: -40 TO 85°CUART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
- The cold start time of 38 s and Hot start time of 1 s
- Supply voltage: 3.3 V
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
- Separated 18X18mm GPS antenna
Reviews
There are no reviews yet.